BYD fault codes
7,677 codes · 97 vehicle records · 71 ECU records · 0 live-data parameters
Codes 7,677
| Code | Description | Brands | System |
|---|---|---|---|
| P0C7A | Drive motor 'B' inverter voltage too high | 25 | Powertrain |
| P0C7B | Generator inverter voltage too high | 22 | Powertrain |
| P0C7C | Hybrid Battery Temperature Sensor 'G' Circuit | 21 | Powertrain |
| P0C7D | Hybrid/EV Battery Temperature Sensor G Circuit Range/Performance | 26 | Powertrain |
| P0C7E | Hybrid Battery Temperature Sensor 'G' Circuit Low | 26 | Powertrain |
| P0C7F | Hybrid Battery Temperature Sensor 'G' Circuit High | 26 | Powertrain |
| P0C80 | High frequency receiver failure | 22 | Powertrain |
| P0C81 | Key transponder failure | 21 | Powertrain |
| P0C82 | Hybrid/EV Battery Temperature Sensor H Circuit Range/Performance | 26 | Powertrain |
| P0C83 | Transponder antenna failure | 26 | Powertrain |
| P0C84 | Transponder tag reading failure | 26 | Powertrain |
| P0C85 | Lighting control failure | 22 | Powertrain |
| P0C86 | Faulty button at the bottom of the lighting control lever | 19 | Powertrain |
| P0C87 | The button at the bottom of the wiper control lever is faulty | 19 | Powertrain |
| P0D11 | Right side lock opening actuator failure | 23 | Powertrain |
| P0FFF | Time Reference High Res Signal A Erratic Pulses | 17 | Powertrain |
| P1000 | OBD-II Monitor Testing Incomplete | 33 | Powertrain |
| P1001 | Short circuit to positive | 32 | Powertrain |
| P1002 | Short circuit to negative | 26 | Powertrain |
| P1003 | Open circuit | 22 | Powertrain |
| P1004 | Torque Difference Cylinder 1: Limit Value Exceeded | 25 | Powertrain |
| P1005 | Manifold tuning valve control performance | 27 | Powertrain |
| P1006 | Torque Difference Cylinder 3: Limit Value Exceeded | 23 | Powertrain |
| P1007 | Gradient monitoring | 23 | Powertrain |
| P1008 | Power Steering Circ Low | 19 | Powertrain |
| P1009 | Mass air flow sensor 1/2: implausible signal from load Calculation; Mechanical failure | 25 | Powertrain |
| P100A | VVEL system (bank 1) | 17 | Powertrain |
| P100B | VVEL system (bank 2) | 19 | Powertrain |
| P100C | Battery sensor module temperature erratic | 16 | Powertrain |
| P100D | Actuator for turbocharger adjustment: stuck or Hard to Move; Open or short to plus | 19 | Powertrain |
| P100E | Torque intervention to protect turbocharger | 16 | Powertrain |
| P100F | Fuel injector: mechanical malfunction; Electrical fault in circuit | 15 | Powertrain |
| P1010 | Swirl flap | 27 | Powertrain |
| P1011 | Intake camshaft actuator park position (bank 1) | 23 | Powertrain |
| P1012 | Exhaust camshaft actuator park position (bank 1) | 25 | Powertrain |
| P1013 | Intake camshaft actuator park position (bank 2) | 22 | Powertrain |
| P1014 | Exhaust camshaft actuator park position (bank 2) | 23 | Powertrain |
| P1015 | Gradient monitoring | 21 | Powertrain |
| P1016 | Reductant control module sensor serial communication circuit high voltage | 19 | Powertrain |
| P1017 | Signal implausible | 19 | Powertrain |
| P1018 | Intake Manifold Runner (Bank 2): Lower Limit not reached | 18 | Powertrain |
| P1019 | Sensor supply voltage too high | 19 | Powertrain |
| P101A | Reductant control module sensor communication ground circuit high voltage | 16 | Powertrain |
| P101B | NO. 028 battery voltage sampling wire loop fault | 15 | Powertrain |
| P101C | NO. 029 battery voltage sampling wire loop fault | 14 | Powertrain |
| P101D | Control unit overtemperature | 15 | Powertrain |
| P101E | Rpm limited due to over-temperature; Open circuit | 13 | Powertrain |
| P101F | High pressure fuel supply: maximum pressure exceeded; Implausible signal | 12 | Powertrain |
| P1020 | Sensor supply voltage too low | 23 | Powertrain |
| P1021 | Oil control valve open | 24 | Powertrain |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.