Results for “P1E3”
Fault codes 23
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P1E30 | Litar sensor suhu bateri (1) | 10 | Powertrain |
| P1E31 | Litar sensor suhu bateri (1) | 11 | Powertrain |
| P1E32 | Auxiliary transmission fluid pump phase W current sensor performance | 12 | Powertrain |
| P1E33 | Auxiliary transmission fluid pump phase U-V-W current sensors not plausible | 12 | Powertrain |
| P1E34 | Litar sensor suhu bateri (1) | 11 | Powertrain |
| P1E35 | Litar sensor suhu bateri (1) | 11 | Powertrain |
| P1E36 | Auxiliary transmission fluid pump inverter temperature sensor performance | 12 | Powertrain |
| P1E37 | Litar sensor suhu bateri (1) | 11 | Powertrain |
| P1E38 | Auxiliary transmission fluid pump inverter supply voltage circuit | 12 | Powertrain |
| P1E39 | Auxiliary transmission fluid pump inverter performance | 11 | Powertrain |
Show 13 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P1E3A | Auxiliary transmission fluid pump motor torque delivered performance | 11 | Powertrain |
| P1E3B | Drive motor rotor high temperature | 11 | Powertrain |
| P1E3C | Litar sensor suhu bateri (1) | 10 | Powertrain |
| P1E3D | Control module calculated Hybrid/EV battery performance | 11 | Powertrain |
| P1E3E | BATT.TEMP sensor circuit(1) | 9 | Powertrain |
| P1E3F | 14V power module read only memory | 10 | Powertrain |
| P1E38A2 | Voltage sensor I of the DC/DC converter has a malfunction. The system voltage is too low. | 1 | Powertrain |
| P1E3A27 | Temperature sensor 4 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3A28 | Temperature sensor 4 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3B27 | Temperature sensor 5 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3B28 | Temperature sensor 5 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3C27 | Temperature sensor 6 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3C28 | Temperature sensor 6 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P1E3A | Auxiliary transmission fluid pump motor torque delivered performance | 11 | Powertrain |
| P1E3B | Drive motor rotor high temperature | 11 | Powertrain |
| P1E3C | Litar sensor suhu bateri (1) | 10 | Powertrain |
| P1E3D | Control module calculated Hybrid/EV battery performance | 11 | Powertrain |
| P1E3E | BATT.TEMP sensor circuit(1) | 9 | Powertrain |
| P1E3F | 14V power module read only memory | 10 | Powertrain |
| P1E38A2 | Voltage sensor I of the DC/DC converter has a malfunction. The system voltage is too low. | 1 | Powertrain |
| P1E3A27 | Temperature sensor 4 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3A28 | Temperature sensor 4 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3B27 | Temperature sensor 5 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3B28 | Temperature sensor 5 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3C27 | Temperature sensor 6 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3C28 | Temperature sensor 6 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.