Results for “C180”
Fault codes 24
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C1800 | The 4WAS/2WAS Module shall log DTC when it determines that a fault exists in the output circuit for the relay that controls air flow to and from the Reservoir | 11 | Chassis |
| C1801 | Motor engage current reached before full apply travel distance | 10 | Chassis |
| C1802 | PBC signal fault | 11 | Chassis |
| C1803 | No assembly test performed | 10 | Chassis |
| C1804 | EPB maintenance mode | 9 | Chassis |
| C1805 | Hydraulic support fault | 10 | Chassis |
| C1806 | Button low-voltage fault | 7 | Chassis |
| C1807 | Brake disc temperature above threshold | 6 | Chassis |
| C1808 | Left rear electronic calipers disconnected | 7 | Chassis |
| C1809 | No description available | 4 | Chassis |
Show 14 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C180B | No description available | 1 | Chassis |
| C180E | No description available | 1 | Chassis |
| C180000 | CAN: error in controller RAM signal value (invalid) | 1 | Chassis |
| C180101 | CAN communication: BS 200/208/233/246 - timeout | 1 | Chassis |
| C180108 | Electronic Parking Brake (EPB) wheel speed sensor signal error | 1 | Chassis |
| C180187 | While communicating with the ESP module via CAN, if a signal is received from TCU in irregular cycle, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C180400 | CAN Error: FCM Time out(LKAS) | 2 | Chassis |
| C180401 | CAN communication: Vehicle Control Unit (VCU) message error - timeout | 1 | Chassis |
| C180487 | CAN Error: FCM Time out(LKAS) | 1 | Chassis |
| C180500 | CAN Error: FCM signal error(LKAS) | 1 | Chassis |
| C180586 | CAN Error: FCM signal error(LKAS) | 1 | Chassis |
| C180900 | No description available | 1 | Chassis |
| C180954 | This function is used to perform calibration of the Electric Park Brake (EPB) current sensor and resolves DTC | 1 | Chassis |
| C180B87 | BSD ECU creates DTC if CGW(Chassis-CAN) signal is not received from BCM | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C180B | No description available | 1 | Chassis |
| C180E | No description available | 1 | Chassis |
| C180000 | CAN: error in controller RAM signal value (invalid) | 1 | Chassis |
| C180101 | CAN communication: BS 200/208/233/246 - timeout | 1 | Chassis |
| C180108 | Electronic Parking Brake (EPB) wheel speed sensor signal error | 1 | Chassis |
| C180187 | While communicating with the ESP module via CAN, if a signal is received from TCU in irregular cycle, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C180400 | CAN Error: FCM Time out(LKAS) | 2 | Chassis |
| C180401 | CAN communication: Vehicle Control Unit (VCU) message error - timeout | 1 | Chassis |
| C180487 | CAN Error: FCM Time out(LKAS) | 1 | Chassis |
| C180500 | CAN Error: FCM signal error(LKAS) | 1 | Chassis |
| C180586 | CAN Error: FCM signal error(LKAS) | 1 | Chassis |
| C180900 | No description available | 1 | Chassis |
| C180954 | This function is used to perform calibration of the Electric Park Brake (EPB) current sensor and resolves DTC | 1 | Chassis |
| C180B87 | BSD ECU creates DTC if CGW(Chassis-CAN) signal is not received from BCM | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.