Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C250255 | No description available | 2 | Chassis |
| C250292 | No description available | 2 | Chassis |
| C250300 | CAN: communication interruption(bus off) | 1 | Chassis |
| C250400 | Low battery voltage | 1 | Chassis |
| C250500 | High battery voltage | 1 | Chassis |
| C252200 | Botschaftslnge ID 36Ch von DRVU Steuergerät fehlerhaft empfangen | 1 | Chassis |
| C252400 | CAN message ABS/ESP invalid signal | 1 | Chassis |
| C252600 | CAN: SAS message not received(checksum error) | 1 | Chassis |
| C254E00 | CanSys - AVI2 Message Timeout | 1 | Chassis |
| C260300 | DGR: Plausibility DGR-Tester / DGR: Plausibilitat DGR-Tester | 1 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C261000 | NBR-CAN hinten: Sensor 2 Part 2: Target Message Counter/Sensor-ID-Error on CAN_REAR | 1 | Chassis |
| C261200 | NBR-CAN hinten: Sensor 2 Part 2: Status Message Counter/Sensor-ID Error on CAN_REAR | 1 | Chassis |
| C261700 | NBR-CAN hinten: Sensor 2 Part 2: Sensor Timeout at CYCLE-Mode on CAN_REAR | 1 | Chassis |
| C261800 | NBR-CAN hinten: Sensor 2 Part 2: Error Message Counter/Sensor-ID-Error on CAN_REAR | 1 | Chassis |
| C262200 | CAN: ECU message not received (invalid) | 1 | Chassis |
| C262400 | CAN: ESP message not received(invalid) | 1 | Chassis |
| C262500 | CAN: ICM message not received(invalid) | 1 | Chassis |
| C262600 | CAN: SAS message not received(invalid) | 1 | Chassis |
| C270100 | NBR-CAN hinten: Sensor 3: Target Message Counter/Sensor-ID-Error on CAN_REAR | 1 | Chassis |
| C270200 | NBR-CAN hinten: Sensor 3: Status Message Counter/Sensor-ID Error on CAN_REAR | 1 | Chassis |
| C270254 | Blind Spot Detection (BSD) exchange initialization work required (left rear) | 2 | Chassis |
| C270354 | Blind Spot Detection (BSD) exchange initialization work required (right rear) | 2 | Chassis |
| C270454 | Blind Spot Detection (BSD) exchange initialization work required (left front) | 1 | Chassis |
| C270554 | Blind Spot Detection (BSD) exchange initialization work required (right front) | 1 | Chassis |
| C270600 | NBR-CAN hinten: Sensor 3: Error Target Message CAN_REAR | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C261000 | NBR-CAN hinten: Sensor 2 Part 2: Target Message Counter/Sensor-ID-Error on CAN_REAR | 1 | Chassis |
| C261200 | NBR-CAN hinten: Sensor 2 Part 2: Status Message Counter/Sensor-ID Error on CAN_REAR | 1 | Chassis |
| C261700 | NBR-CAN hinten: Sensor 2 Part 2: Sensor Timeout at CYCLE-Mode on CAN_REAR | 1 | Chassis |
| C261800 | NBR-CAN hinten: Sensor 2 Part 2: Error Message Counter/Sensor-ID-Error on CAN_REAR | 1 | Chassis |
| C262200 | CAN: ECU message not received (invalid) | 1 | Chassis |
| C262400 | CAN: ESP message not received(invalid) | 1 | Chassis |
| C262500 | CAN: ICM message not received(invalid) | 1 | Chassis |
| C262600 | CAN: SAS message not received(invalid) | 1 | Chassis |
| C270100 | NBR-CAN hinten: Sensor 3: Target Message Counter/Sensor-ID-Error on CAN_REAR | 1 | Chassis |
| C270200 | NBR-CAN hinten: Sensor 3: Status Message Counter/Sensor-ID Error on CAN_REAR | 1 | Chassis |
| C270254 | Blind Spot Detection (BSD) exchange initialization work required (left rear) | 2 | Chassis |
| C270354 | Blind Spot Detection (BSD) exchange initialization work required (right rear) | 2 | Chassis |
| C270454 | Blind Spot Detection (BSD) exchange initialization work required (left front) | 1 | Chassis |
| C270554 | Blind Spot Detection (BSD) exchange initialization work required (right front) | 1 | Chassis |
| C270600 | NBR-CAN hinten: Sensor 3: Error Target Message CAN_REAR | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.