Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C110115 | Lane keeping assistant windscreen heater - open circuit/short to positive | 1 | Chassis |
| C110116 | Under voltage(B+) | 3 | Chassis |
| C110117 | If the supply voltage to LDWS ECU is higher than specification, LDWS ECU sets DTC | 2 | Chassis |
| C11014B | No description available | 1 | Chassis |
| C110155 | No description available | 2 | Chassis |
| C110200 | Mode button loose contact(ECS) | 3 | Chassis |
| C110201 | If the supply voltage to HECU is lower than specification, HECU sets DTC | 2 | Chassis |
| C110216 | If the supply voltage to LDWS ECU is lower than specification, LDWS ECU sets DTC | 2 | Chassis |
| C110217 | Over voltage(B+) | 3 | Chassis |
| C110300 | No fault relating to - ACC sensor misaligned - entered, but other faults are entered | 4 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C110301 | The EPB Module sets DTC when CAN IG signal via Engine ECM is entered but hardware IG signal is not input | 1 | Chassis |
| C110400 | Der MMR Front Slave meldet einen Fehler. | 4 | Chassis |
| C110500 | Sensor Supply Voltage Fault | 1 | Chassis |
| C110501 | Sensor Supply Voltage Fault | 1 | Chassis |
| C110600 | Signal Value out of valid range | 2 | Chassis |
| C110601 | No vehicle power signal | 1 | Chassis |
| C1106F0 | Dynamic calibration Limit value exceeded | 1 | Chassis |
| C110700 | Falsche Art von Raddrehzahlsensor VL erkannt | 2 | Chassis |
| C110777 | Electronic Parking Brake (EPB) actuator status error | 1 | Chassis |
| C110794 | Electronic Parking Brake (EPB) operation abnormal | 1 | Chassis |
| C110800 | VL Richtung fehlmontiert | 2 | Chassis |
| C110806 | Electronic Parking Brake (EPB) control failure | 1 | Chassis |
| C110900 | IGN signal error | 1 | Chassis |
| C110921 | IGN signal error | 1 | Chassis |
| C110A54 | Fault - Camera control unit no basic setting is entered | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C110301 | The EPB Module sets DTC when CAN IG signal via Engine ECM is entered but hardware IG signal is not input | 1 | Chassis |
| C110400 | Der MMR Front Slave meldet einen Fehler. | 4 | Chassis |
| C110500 | Sensor Supply Voltage Fault | 1 | Chassis |
| C110501 | Sensor Supply Voltage Fault | 1 | Chassis |
| C110600 | Signal Value out of valid range | 2 | Chassis |
| C110601 | No vehicle power signal | 1 | Chassis |
| C1106F0 | Dynamic calibration Limit value exceeded | 1 | Chassis |
| C110700 | Falsche Art von Raddrehzahlsensor VL erkannt | 2 | Chassis |
| C110777 | Electronic Parking Brake (EPB) actuator status error | 1 | Chassis |
| C110794 | Electronic Parking Brake (EPB) operation abnormal | 1 | Chassis |
| C110800 | VL Richtung fehlmontiert | 2 | Chassis |
| C110806 | Electronic Parking Brake (EPB) control failure | 1 | Chassis |
| C110900 | IGN signal error | 1 | Chassis |
| C110921 | IGN signal error | 1 | Chassis |
| C110A54 | Fault - Camera control unit no basic setting is entered | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.