Results for “P”
Fault codes 32,087
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P1D1A | Controller hardware overcurrent | 3 | Powertrain |
| P1D1B | VCU V2S Voltage Sensor Circuit High | 11 | Powertrain |
| P1D1C | Controller input voltage is lower than the lower limit | 11 | Powertrain |
| P1D1D | Controller input voltage is higher than the upper limit | 10 | Powertrain |
| P1D1E | Controller temperature too high alarm | 5 | Powertrain |
| P1D1F | Motor winding temperature too high alarm | 4 | Powertrain |
| P1D20 | Multi module handshake failure | 12 | Powertrain |
| P1D21 | Motor A phase current overload | 9 | Powertrain |
| P1D22 | Battery Charger Temperature Sensor Circuit Malfunction | 14 | Powertrain |
| P1D23 | Phase current sensor failure | 14 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P1D24 | Power circuit | 14 | Powertrain |
| P1D25 | Shift control rationality | 17 | Powertrain |
| P1D26 | DC/DC current limiting protection | 8 | Powertrain |
| P1D27 | PFC temperature | 9 | Powertrain |
| P1D28 | Temperature in inverter circuit 1 | 14 | Powertrain |
| P1D29 | Pinge muundur 2 vooluring | 10 | Powertrain |
| P1D2A | Hydrogen concentration sensor circuit (around hydrogen tank) | 3 | Powertrain |
| P1D2B | Charge Inlet Temperature Sensor 2 Circuit Low | 2 | Powertrain |
| P1D2C | Hydrogen tank pressure sensor circuit | 12 | Powertrain |
| P1D2D | Gauge Control Module Lost Communication With Battery Condition Monitor Module | 6 | Powertrain |
| P1D2E | Battery Condition Monitor Module Lost Communication With Gauge Control Module | 11 | Powertrain |
| P1D2F | Oil viscosity sensor overtemperature | 14 | Powertrain |
| P1D30 | This procedure deletes the DTC P1C5F and (Too low viscosity) immediately after the procedure has been performed. | 17 | Powertrain |
| P1D31 | ROM/RAM failure | 12 | Powertrain |
| P1D32 | EEPROM fail | 13 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P1D24 | Power circuit | 14 | Powertrain |
| P1D25 | Shift control rationality | 17 | Powertrain |
| P1D26 | DC/DC current limiting protection | 8 | Powertrain |
| P1D27 | PFC temperature | 9 | Powertrain |
| P1D28 | Temperature in inverter circuit 1 | 14 | Powertrain |
| P1D29 | Pinge muundur 2 vooluring | 10 | Powertrain |
| P1D2A | Hydrogen concentration sensor circuit (around hydrogen tank) | 3 | Powertrain |
| P1D2B | Charge Inlet Temperature Sensor 2 Circuit Low | 2 | Powertrain |
| P1D2C | Hydrogen tank pressure sensor circuit | 12 | Powertrain |
| P1D2D | Gauge Control Module Lost Communication With Battery Condition Monitor Module | 6 | Powertrain |
| P1D2E | Battery Condition Monitor Module Lost Communication With Gauge Control Module | 11 | Powertrain |
| P1D2F | Oil viscosity sensor overtemperature | 14 | Powertrain |
| P1D30 | This procedure deletes the DTC P1C5F and (Too low viscosity) immediately after the procedure has been performed. | 17 | Powertrain |
| P1D31 | ROM/RAM failure | 12 | Powertrain |
| P1D32 | EEPROM fail | 13 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.