Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C006A04 | Sensor Cluster Internal Error - System Internal Failures | 1 | Chassis |
| C006A09 | Multi-axis acceleration sensor failure | 1 | Chassis |
| C006A29 | Yrs1 signal value contains Invalid Value pattern | 1 | Chassis |
| C006A2A | Yrs1 signal is faulty (permanent). | 1 | Chassis |
| C006A45 | PowerOn Monitoring was not able to detect startup (PowerOnSelftest) of SensorCluster also resetting sensor via CAN failed | 1 | Chassis |
| C006A4A | Sensor ID comparison for Yrs Axs and Ays | 1 | Chassis |
| C006A4B | Detected sensor type do not correspond with system configuration settings | 1 | Chassis |
| C006A54 | Sensor Offset calibration for Axs and Ays | 2 | Chassis |
| C006A86 | Multi-axis acceleration sensor plausibility error | 1 | Chassis |
| C006AEC | Yrs1 signal is faulty (permanent). | 1 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C006AED | Alternating Yrs1 signal faults exceeds max. fault latency (100ms) | 1 | Chassis |
| C006AEE | Detected sensor type do not correspond with system configuration settings | 1 | Chassis |
| C006AEF | Yrs1 signal is not available (not equipped) / HW problem | 1 | Chassis |
| C006AFA | Sensor Cluster Init Fehler | 1 | Chassis |
| C006AFB | Sensor Cluster Signal(s) sends SNA or initial value | 1 | Chassis |
| C006AFC | Sensor Cluster sync message failure | 1 | Chassis |
| C006AFD | Sensor Cluster Synchronisierungsfehler | 1 | Chassis |
| C006B00 | Continuous Control or Emergency Brake Failure | 2 | Chassis |
| C006B54 | This calibration shall be done every time the Sensing and Diagnostic Module (SDM) (airbag)/Brake System Module (BSM) is replaced and/or calibrated, the Proxi is written or following DTC is present | 1 | Chassis |
| C006C00 | Stability System | 1 | Chassis |
| C006C4B | The traction system has a malfunction. Over Temperature | 1 | Chassis |
| C006C53 | Stability System is degraded to ABS backup | 1 | Chassis |
| C006C64 | Stability System | 2 | Chassis |
| C006C81 | The traction system has a malfunction. Incorrect data were received. | 1 | Chassis |
| C006C87 | The traction system has a malfunction. The message is missing. | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C006AED | Alternating Yrs1 signal faults exceeds max. fault latency (100ms) | 1 | Chassis |
| C006AEE | Detected sensor type do not correspond with system configuration settings | 1 | Chassis |
| C006AEF | Yrs1 signal is not available (not equipped) / HW problem | 1 | Chassis |
| C006AFA | Sensor Cluster Init Fehler | 1 | Chassis |
| C006AFB | Sensor Cluster Signal(s) sends SNA or initial value | 1 | Chassis |
| C006AFC | Sensor Cluster sync message failure | 1 | Chassis |
| C006AFD | Sensor Cluster Synchronisierungsfehler | 1 | Chassis |
| C006B00 | Continuous Control or Emergency Brake Failure | 2 | Chassis |
| C006B54 | This calibration shall be done every time the Sensing and Diagnostic Module (SDM) (airbag)/Brake System Module (BSM) is replaced and/or calibrated, the Proxi is written or following DTC is present | 1 | Chassis |
| C006C00 | Stability System | 1 | Chassis |
| C006C4B | The traction system has a malfunction. Over Temperature | 1 | Chassis |
| C006C53 | Stability System is degraded to ABS backup | 1 | Chassis |
| C006C64 | Stability System | 2 | Chassis |
| C006C81 | The traction system has a malfunction. Incorrect data were received. | 1 | Chassis |
| C006C87 | The traction system has a malfunction. The message is missing. | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.