Results for “P200”
Fault codes 81
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P200896 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung. Es liegt ein interner Komponentenfehler vor. | 1 | Powertrain |
| P200900 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen Kurzschluss nach Masse. | 3 | Powertrain |
| P200901 | Swirl drive fault (short circuit to ground) for negative duty cyle | 1 | Powertrain |
| P200908 | Heating of component right O2 sensor after TWC: heating capacity is too low | 1 | Powertrain |
| P200911 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen Kurzschluss nach Masse. Es liegt ein Kurzschluss nach Masse vor. | 2 | Powertrain |
| P200A00 | PCM sets DTC if the deviation between target and actual position of VCM flap is too large | 2 | Powertrain |
| P200A01 | Knock sensor system of ECU: check the diagnosis multiplexer | 1 | Powertrain |
| P200A02 | Knock sensor system of ECU: knock sensor | 1 | Powertrain |
| P200A04 | Swirl HB drive fault (over temperature) | 1 | Powertrain |
| P200A08 | Knock sensor system of ECU: analysis circuit is faulty | 1 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P200A0A | Swirl Position Short Circuit to GND | 1 | Powertrain |
| P200A13 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Es liegt eine Unterbrechung vor. | 1 | Powertrain |
| P200A16 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Spannungsgrenzwert ist unterschritten. | 1 | Powertrain |
| P200A1D | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Der Stromwert liegt außerhalb des zulässigen Bereiches. | 2 | Powertrain |
| P200A4B | Swirl HB Drive Fault (Short Circuit to VBATT) | 1 | Powertrain |
| P200A78 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Die Anpassung oder Justierung ist nicht korrekt. | 1 | Powertrain |
| P200A85 | Swirl HB Drive Fault (Open Circuit) | 1 | Powertrain |
| P200A96 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung.Es liegt ein interner Komponentenfehler vor. | 1 | Powertrain |
| P200B00 | Faulty TCU CPU (internal) | 1 | Powertrain |
| P200B01 | The efficiency of the right catalytic converter is insufficient (function chain) | 1 | Powertrain |
| P200C00 | Faulty TCU program control | 1 | Powertrain |
| P200C01 | Right O2 sensor before TWC aging, correction variable exceeded: delay time too long | 1 | Powertrain |
| P200C02 | Right O2 sensor before TWC aging, correction variable exceeded: delay time too short | 1 | Powertrain |
| P200C98 | Der Dieselpartikelfilter (Zylinderreihe 1) hat Übertemperatur. Die Komponente oder das System hat Übertemperatur. | 1 | Powertrain |
| P200D01 | Right O2 sensor before TWC: aging, period too long | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P200A0A | Swirl Position Short Circuit to GND | 1 | Powertrain |
| P200A13 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Es liegt eine Unterbrechung vor. | 1 | Powertrain |
| P200A16 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Spannungsgrenzwert ist unterschritten. | 1 | Powertrain |
| P200A1D | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Der Stromwert liegt außerhalb des zulässigen Bereiches. | 2 | Powertrain |
| P200A4B | Swirl HB Drive Fault (Short Circuit to VBATT) | 1 | Powertrain |
| P200A78 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung. Die Anpassung oder Justierung ist nicht korrekt. | 1 | Powertrain |
| P200A85 | Swirl HB Drive Fault (Open Circuit) | 1 | Powertrain |
| P200A96 | Die Ladungsbewegungsklappe (Zylinderreihe 1) hat Funktionsstörung.Es liegt ein interner Komponentenfehler vor. | 1 | Powertrain |
| P200B00 | Faulty TCU CPU (internal) | 1 | Powertrain |
| P200B01 | The efficiency of the right catalytic converter is insufficient (function chain) | 1 | Powertrain |
| P200C00 | Faulty TCU program control | 1 | Powertrain |
| P200C01 | Right O2 sensor before TWC aging, correction variable exceeded: delay time too long | 1 | Powertrain |
| P200C02 | Right O2 sensor before TWC aging, correction variable exceeded: delay time too short | 1 | Powertrain |
| P200C98 | Der Dieselpartikelfilter (Zylinderreihe 1) hat Übertemperatur. Die Komponente oder das System hat Übertemperatur. | 1 | Powertrain |
| P200D01 | Right O2 sensor before TWC: aging, period too long | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 7
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Mercedes-Benz | PRES_Temperaturschwelle_50ppp200_C | |
| Fiat | There is a DTC /P2002 in the fault memory because the particulate filter is clogged | code P1206 |
| Chrysler | P2009 SHORT RUNNER SOLENOID CIRCUIT LOW or CHARGE AIR COOLER CIRCULATION PUMP CONTROL CKT | code P023A |
| Chrysler | P2008 SHORT RUNNER SOLENOID CIRCUIT or CHARGE AIR COOLER CIRCULATION PUMP CONTROL CKT LOW | code P023B |
| Ford | If DTC or P2002 is set, perform this procedure to regenerate the diesel particulate filter | code P1206 |
| Mazda | If DTC or P2002 is set, perform this procedure to regenerate the diesel particulate filter | code P1206 |
| Hyundai | If faulty VSA motor control circuit is detected for more than 2 sec., ECM sets DTC P200900. This fault might be caused by open or short to ground in control circuit of VSA. If open in control circuit is detected, DTC is also set | code P201500 |
Live data 1
| Brand | Parameter | Units | Min | Max |
|---|---|---|---|---|
| Mercedes-Benz | PRES_Temperaturschwelle_50ppp200_C | - | -40 | 140 |
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.