Results for “C006”
Fault codes 69
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C006A54 | Sensor Offset calibration for Axs and Ays | 2 | Chassis |
| C006A86 | Multi-axis acceleration sensor plausibility error | 1 | Chassis |
| C006AEC | Yrs1 signal is faulty (permanent). | 1 | Chassis |
| C006AED | Alternating Yrs1 signal faults exceeds max. fault latency (100ms) | 1 | Chassis |
| C006AEE | Detected sensor type do not correspond with system configuration settings | 1 | Chassis |
| C006AEF | Yrs1 signal is not available (not equipped) / HW problem | 1 | Chassis |
| C006AFA | Sensor Cluster Init Fehler | 1 | Chassis |
| C006AFB | Sensor Cluster Signal(s) sends SNA or initial value | 1 | Chassis |
| C006AFC | Sensor Cluster sync message failure | 1 | Chassis |
| C006AFD | Sensor Cluster Synchronisierungsfehler | 1 | Chassis |
Show 9 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C006B00 | Continuous Control or Emergency Brake Failure | 2 | Chassis |
| C006B54 | This calibration shall be done every time the Sensing and Diagnostic Module (SDM) (airbag)/Brake System Module (BSM) is replaced and/or calibrated, the Proxi is written or following DTC is present | 1 | Chassis |
| C006C00 | Stability System | 1 | Chassis |
| C006C4B | The traction system has a malfunction. Over Temperature | 1 | Chassis |
| C006C53 | Stability System is degraded to ABS backup | 1 | Chassis |
| C006C64 | Stability System | 2 | Chassis |
| C006C81 | The traction system has a malfunction. Incorrect data were received. | 1 | Chassis |
| C006C87 | The traction system has a malfunction. The message is missing. | 1 | Chassis |
| C006F00 | Brake electronics control module service mode active | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C006B00 | Continuous Control or Emergency Brake Failure | 2 | Chassis |
| C006B54 | This calibration shall be done every time the Sensing and Diagnostic Module (SDM) (airbag)/Brake System Module (BSM) is replaced and/or calibrated, the Proxi is written or following DTC is present | 1 | Chassis |
| C006C00 | Stability System | 1 | Chassis |
| C006C4B | The traction system has a malfunction. Over Temperature | 1 | Chassis |
| C006C53 | Stability System is degraded to ABS backup | 1 | Chassis |
| C006C64 | Stability System | 2 | Chassis |
| C006C81 | The traction system has a malfunction. Incorrect data were received. | 1 | Chassis |
| C006C87 | The traction system has a malfunction. The message is missing. | 1 | Chassis |
| C006F00 | Brake electronics control module service mode active | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 8
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| GM | 0220c006 | |
| Land Rover | AHU_NUM_C006_PID_7_82456_377_1_0_1_0_0_0_0_0 | |
| Land Rover | AHU_NUM_C006_PID_2_101271_565_1_0_1_0_0_0_0_0 | |
| Volkswagen | 2. - C00669 Turbo pump relay - malfunction | code P160C |
| Chrysler | 2.No fault stored except DTC -xx or C006C-xx | code C006A |
| Fiat | 2.No fault stored except DTC -xx or C006C-xx | code C006A |
| Chrysler | 2.No fault stored except DTC C006A-xx or -xx | code C006C |
| Fiat | 2.No fault stored except DTC C006A-xx or -xx | code C006C |
Live data 2
| Brand | Parameter | Units | Min | Max |
|---|---|---|---|---|
| Land Rover | AHU_NUM_C006_PID_7_82456_377_1_0_1_0_0_0_0_0 | - | 0 | 65535 |
| Land Rover | AHU_NUM_C006_PID_2_101271_565_1_0_1_0_0_0_0_0 | - | 0 | 65535 |
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.