Results for “B100”
Fault codes 142
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| B100415 | Auto Defog Sensor (ADS) circuit open or short to battery | 1 | Body |
| B100416 | Unterspannung (lokal < 8V) an der Backup Batterie oder Klemme 30b am EZS fehlt | 1 | Body |
| B10041C | Battery voltage high | 1 | Body |
| B100452 | This DTC is set when variant coding is incorrectly performed as if CUbis option is installed on the vehicle even though real vehicle has not CUbis on the CAN BUS | 1 | Body |
| B100455 | This DTC is set when variant coding is incorrectly performed as if CUbis option is not installed on the vehicle even though real vehicle has CUbis on the CAN BUS | 1 | Body |
| B100500 | CAN communication: dashboard signal not received (region specification information) | 1 | Body |
| B100502 | Der Feuchte- und Temperatursensor 2 hat Funktionsstörung. There is a general signal fault. | 1 | Body |
| B100509 | Ionizer error | 1 | Body |
| B10051C | Battery voltage low | 1 | Body |
| B100528 | Der Feuchte- und Temperatursensor 2 hat Funktionsstörung. The signal offset is outside the permissible range. | 1 | Body |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| B10052A | Der Feuchte- und Temperatursensor 2 hat Funktionsstörung. There is no signal change. | 1 | Body |
| B100552 | When setting variant coding, if the Air bag option is added to the vehicle not equipped with Air bag, sets DTC | 1 | Body |
| B100555 | When setting variant coding, if the Air bag option is not added to the vehicle equipped with Air bag, sets DTC | 1 | Body |
| B100593 | ISM Notpfad defekt | 1 | Body |
| B100600 | Touch Instrument Cluster (IC) communication error | 1 | Body |
| B100611 | Blower circuit short to ground | 1 | Body |
| B100612 | Blower circuit short to battery (+) | 1 | Body |
| B10061A | Driver seat belt tensioner igniter, insufficient resistance | 1 | Body |
| B100628 | Sensor 1 of the pressure and temperature sensor for refrigerant between compressor and condenser has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100652 | is set when variant coding is incorrectly performed as if PSB option is installed on the vehicle even though real vehicle has not PSB on the CAN BUS | 1 | Body |
| B100653 | Igniter 1 for driver seat belt tensioner | 1 | Body |
| B100655 | is set when variant coding is incorrectly performed as if PSB option is not installed on the vehicle even though real vehicle has PSB on the CAN BUS | 1 | Body |
| B100691 | Sensor 1 of the pressure and temperature sensor for refrigerant between compressor and condenser has a malfunction. The parameter is outside the permissible range. | 1 | Body |
| B100700 | Long-Term Evolution (LTE) antenna circuit short | 1 | Body |
| B100711 | Mode actuator circuit short to ground | 1 | Body |
| Code | Description | Brands | System |
|---|---|---|---|
| B10052A | Der Feuchte- und Temperatursensor 2 hat Funktionsstörung. There is no signal change. | 1 | Body |
| B100552 | When setting variant coding, if the Air bag option is added to the vehicle not equipped with Air bag, sets DTC | 1 | Body |
| B100555 | When setting variant coding, if the Air bag option is not added to the vehicle equipped with Air bag, sets DTC | 1 | Body |
| B100593 | ISM Notpfad defekt | 1 | Body |
| B100600 | Touch Instrument Cluster (IC) communication error | 1 | Body |
| B100611 | Blower circuit short to ground | 1 | Body |
| B100612 | Blower circuit short to battery (+) | 1 | Body |
| B10061A | Driver seat belt tensioner igniter, insufficient resistance | 1 | Body |
| B100628 | Sensor 1 of the pressure and temperature sensor for refrigerant between compressor and condenser has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100652 | is set when variant coding is incorrectly performed as if PSB option is installed on the vehicle even though real vehicle has not PSB on the CAN BUS | 1 | Body |
| B100653 | Igniter 1 for driver seat belt tensioner | 1 | Body |
| B100655 | is set when variant coding is incorrectly performed as if PSB option is not installed on the vehicle even though real vehicle has PSB on the CAN BUS | 1 | Body |
| B100691 | Sensor 1 of the pressure and temperature sensor for refrigerant between compressor and condenser has a malfunction. The parameter is outside the permissible range. | 1 | Body |
| B100700 | Long-Term Evolution (LTE) antenna circuit short | 1 | Body |
| B100711 | Mode actuator circuit short to ground | 1 | Body |
Advanced: scanner vehicle and live-data matches
Vehicles 1
| Brand | Model / variant | Details |
|---|---|---|
| Toyota | GDB100 | code GDB100 · JP · engine 3GD-FTV |
Live data 8
| Brand | Parameter | Units | Min | Max |
|---|---|---|---|---|
| Mercedes-Benz | ERR_B1000_0 | - | - | - |
| Mercedes-Benz | ERR_B1000_4 | - | - | - |
| Mercedes-Benz | ERR_B1000_3 | - | - | - |
| Smart | ERR_B1000_4 | - | - | - |
| Smart | ERR_B1000_3 | - | - | - |
| Smart | ERR_B1000_0 | - | - | - |
| Mercedes-Benz | Enable_DEF@SAM906.Istwerte_RelativeURL@b100057%82882 | - | - | - |
| Sprinter | Enable_DEF@SAM906.Istwerte_RelativeURL@b100057%82882 | - | - | - |
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.