Results for “P”
Fault codes 32,087
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P1E2112 | Sensor B 'Output voltage of on-board charger' has a malfunction. There is a short circuit to positive | 1 | Powertrain |
| P1E2192 | Sensor B 'Output voltage of on-board charger' has a malfunction. The function or the instruction is faulty. | 1 | Powertrain |
| P1E21A2 | Sensor B 'Output voltage of on-board charger' has a malfunction. The system voltage is too low. | 1 | Powertrain |
| P1E21A3 | Sensor B 'Output voltage of on-board charger' has a malfunction. The system voltage is too high. | 1 | Powertrain |
| P1E2248 | Turn the ignition off, wait for 10s, start the vehicle again and read the DTC. If there is no, the calibration is successful | 1 | Powertrain |
| P1E2B68 | No description available | 1 | Powertrain |
| P1E38A2 | Voltage sensor I of the DC/DC converter has a malfunction. The system voltage is too low. | 1 | Powertrain |
| P1E3A27 | Temperature sensor 4 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3A28 | Temperature sensor 4 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3B27 | Temperature sensor 5 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P1E3B28 | Temperature sensor 5 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3C27 | Temperature sensor 6 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3C28 | Temperature sensor 6 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E4D12 | Voltage sensor A of DCDC high-voltage side has malfunction - Circuit Short To Battery | 1 | Powertrain |
| P1E4D14 | Voltage sensor A of DCDC high-voltage side has malfunction - Circuit Short To Ground or Open | 1 | Powertrain |
| P1EC700 | Lower DC-DC Converter (LDC) hardware error | 1 | Powertrain |
| P1EEC00 | Loudspeaker test active routine | 1 | Powertrain |
| P1F0100 | DC/DC - Replace DCDC | 1 | Powertrain |
| P1F0200 | DC/DC - 12V Overvoltage | 1 | Powertrain |
| P200000 | Der Wirkungsgrad des NOx-Speicherkatalysators (Zylinderreihe 1) ist nicht ausreichend. | 2 | Powertrain |
| P200100 | Faulty TCU internal watchdog function | 1 | Powertrain |
| P200200 | is set when 1) Differncial pressure below lower limit value at exhaust flow above specified value(Case 1) or 2) Differential pressure above maximum acceptable value(Case 2) is detected | 2 | Powertrain |
| P200300 | Faulty TCU external watchdog function | 1 | Powertrain |
| P200400 | PCM sets DTC if the PCM detects open stuck of the VCM actuator | 2 | Powertrain |
| P200401 | Hot film mass air flow sensor: short circuit to battery or reference voltage | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P1E3B28 | Temperature sensor 5 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E3C27 | Temperature sensor 6 of the control unit has a malfunction. The signal change rate is above the permissible limit value. | 1 | Powertrain |
| P1E3C28 | Temperature sensor 6 of the control unit has a malfunction. The signal offset is outside the permissible range. | 1 | Powertrain |
| P1E4D12 | Voltage sensor A of DCDC high-voltage side has malfunction - Circuit Short To Battery | 1 | Powertrain |
| P1E4D14 | Voltage sensor A of DCDC high-voltage side has malfunction - Circuit Short To Ground or Open | 1 | Powertrain |
| P1EC700 | Lower DC-DC Converter (LDC) hardware error | 1 | Powertrain |
| P1EEC00 | Loudspeaker test active routine | 1 | Powertrain |
| P1F0100 | DC/DC - Replace DCDC | 1 | Powertrain |
| P1F0200 | DC/DC - 12V Overvoltage | 1 | Powertrain |
| P200000 | Der Wirkungsgrad des NOx-Speicherkatalysators (Zylinderreihe 1) ist nicht ausreichend. | 2 | Powertrain |
| P200100 | Faulty TCU internal watchdog function | 1 | Powertrain |
| P200200 | is set when 1) Differncial pressure below lower limit value at exhaust flow above specified value(Case 1) or 2) Differential pressure above maximum acceptable value(Case 2) is detected | 2 | Powertrain |
| P200300 | Faulty TCU external watchdog function | 1 | Powertrain |
| P200400 | PCM sets DTC if the PCM detects open stuck of the VCM actuator | 2 | Powertrain |
| P200401 | Hot film mass air flow sensor: short circuit to battery or reference voltage | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.