Results for “P2C9”
Fault codes 32
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P2C921D | The actuation of the contactors in the hybrid/high-voltage battery has an electrical fault or an open circuit. Circuit Current Out of Range. | 1 | Powertrain |
| P2C9262 | The actuation of the contactors in the hybrid/high-voltage battery has an electrical fault or an open circuit. The signal comparison is faulty. | 1 | Powertrain |
| P2C9284 | The actuation of the contactors in the hybrid/high-voltage battery has an electrical fault or an open circuit. There is a signal below the permissible limit value. | 1 | Powertrain |
| P2C9316 | The actuation of the contactors in the hybrid/high-voltage battery has a malfunction. The limit value for electrical voltage has not been attained. | 1 | Powertrain |
| P2C9400 | The actuation of the contactors in the hybrid/high-voltage battery has a short circuit to ground. | 1 | Powertrain |
| P2C9414 | The actuation of the contactors in the hybrid/high-voltage battery has a short circuit to ground. There is a short circuit to ground or an open circuit. | 1 | Powertrain |
| P2C9500 | The actuation of the contactors in the hybrid/high-voltage battery has a short circuit to positive. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 2
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Ford | otherwise, BECM shall set Negative Contactor Fault Status = 0b0: No Fault n) BECM shall set Contactor System Enable Fault Status = 0b1: Fault, if the condition for BECM to set DTCs (-00, P2C95-00: CONT_PWR Contactor Power) is met | code P2C92 |
| Ford | otherwise, BECM shall set Negative Contactor Fault Status = 0b0: No Fault n) BECM shall set Contactor System Enable Fault Status = 0b1: Fault, if the condition for BECM to set DTCs (P2C92-00, -00: CONT_PWR Contactor Power) is met | code P2C95 |
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.