Results for “P0D2”
Fault codes 56
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P0D2601 | Temperature sensor disconnection failure (level 1) | 1 | Powertrain |
| P0D2602 | Temperature sensor disconnection failure (level 2) | 1 | Powertrain |
| P0D2603 | Temperature sensor short circuit failure (level 1) | 1 | Powertrain |
| P0D2604 | Temperature sensor short circuit failure (level 2) | 1 | Powertrain |
| P0D2605 | Cell balancing switch on/off not working - fault | 1 | Powertrain |
| P0D2606 | Cell balancing circuit open | 1 | Powertrain |
| P0D2609 | The precharging time for the on-board charger is too long. There is a component fault. | 1 | Powertrain |
| P0D2664 | The precharging time for the on-board charger is too long. There is an implausible signal. | 1 | Powertrain |
| P0D2696 | The precharging time for the on-board charger is too long. There is an internal component fault. | 1 | Powertrain |
| P0D26FA | Battery Charger System Precharge Time Too Long - HVAC Bulk R1 | 1 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P0D26FB | Battery Charger System Precharge Time Too Long - HVAC Bulk R2 | 1 | Powertrain |
| P0D2700 | Battery Charger Input Voltage Too Low | 1 | Powertrain |
| P0D2701 | Cell temperature low | 1 | Powertrain |
| P0D2702 | The input voltage of the on-board charger is too low. There is a general signal fault. | 2 | Powertrain |
| P0D2716 | The input voltage of the on-board charger is too low. The limit value for electrical voltage has not been attained. | 1 | Powertrain |
| P0D2718 | The input voltage of the on-board charger is too low. The limit value for current has not been attained. | 1 | Powertrain |
| P0D271C | The input voltage of the on-board charger is too low. The voltage value is outside the permissible range. | 1 | Powertrain |
| P0D27FA | Battery Charger Input Voltage Too Low Phase L1/N - Development | 1 | Powertrain |
| P0D27FB | Battery Charger Input Voltage Too Low Phase L2 - Development | 1 | Powertrain |
| P0D2800 | Battery Charger Input Voltage Too High | 1 | Powertrain |
| P0D2801 | The input voltage of the on-board charger is too high. There is a general electrical fault. | 2 | Powertrain |
| P0D2802 | The input voltage of the on-board charger is too high. There is a general signal fault. | 2 | Powertrain |
| P0D2812 | The input voltage of the on-board charger is too high. The limit value for electrical voltage has been exceeded. | 1 | Powertrain |
| P0D2815 | The input voltage of the on-board charger is too high. The voltage value is outside the permissible range. | 1 | Powertrain |
| P0D2901 | Battery overtemperature for safety reasons | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P0D26FB | Battery Charger System Precharge Time Too Long - HVAC Bulk R2 | 1 | Powertrain |
| P0D2700 | Battery Charger Input Voltage Too Low | 1 | Powertrain |
| P0D2701 | Cell temperature low | 1 | Powertrain |
| P0D2702 | The input voltage of the on-board charger is too low. There is a general signal fault. | 2 | Powertrain |
| P0D2716 | The input voltage of the on-board charger is too low. The limit value for electrical voltage has not been attained. | 1 | Powertrain |
| P0D2718 | The input voltage of the on-board charger is too low. The limit value for current has not been attained. | 1 | Powertrain |
| P0D271C | The input voltage of the on-board charger is too low. The voltage value is outside the permissible range. | 1 | Powertrain |
| P0D27FA | Battery Charger Input Voltage Too Low Phase L1/N - Development | 1 | Powertrain |
| P0D27FB | Battery Charger Input Voltage Too Low Phase L2 - Development | 1 | Powertrain |
| P0D2800 | Battery Charger Input Voltage Too High | 1 | Powertrain |
| P0D2801 | The input voltage of the on-board charger is too high. There is a general electrical fault. | 2 | Powertrain |
| P0D2802 | The input voltage of the on-board charger is too high. There is a general signal fault. | 2 | Powertrain |
| P0D2812 | The input voltage of the on-board charger is too high. The limit value for electrical voltage has been exceeded. | 1 | Powertrain |
| P0D2815 | The input voltage of the on-board charger is too high. The voltage value is outside the permissible range. | 1 | Powertrain |
| P0D2901 | Battery overtemperature for safety reasons | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.