Results for “P050”
Fault codes 39
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P050286 | signal invalid - Battery temperature sensors - signal invalid | 1 | Powertrain |
| P050300 | Vehicle speed sensor fault (signal lost) | 1 | Powertrain |
| P050400 | Brake switch (1),(2) correlation | 1 | Powertrain |
| P050464 | Die Signale vom Schalter 'Bremslicht' sind im Vergleich untereinander unplausibel. Es liegt ein unplausibles Signal vor. | 2 | Powertrain |
| P050500 | Die Leerlaufdrehzahlregelung hat Funktionsstörung. | 2 | Powertrain |
| P050502 | Die Leerlaufdrehzahlregelung hat Funktionsstörung. Es liegt ein allgemeiner Signalfehler vor. | 1 | Powertrain |
| P050600 | Die Leerlaufdrehzahl ist bei warmem Verbrennungsmotor zu niedrig. | 2 | Powertrain |
| P050700 | Idle air control system - RPM higher than expected | 1 | Powertrain |
| P050A00 | Die Leerlaufdrehzahlregelung hat beim Kaltstart Funktionsstörung. | 3 | Powertrain |
| P050A15 | Die Leerlaufdrehzahlregelung hat beim Kaltstart Funktionsstörung. Es liegt ein Kurzschluss nach Plus oder eine Unterbrechung vor. | 1 | Powertrain |
Show 4 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P050B00 | Abnormal quotient of integrated deviation of ignition angle efficiency setpoint and actual ignition angle efficiency during catalyst heating active and accumulated time spent in idle speed is detected, PCM sets DTC | 2 | Powertrain |
| P050B64 | Die Zndwinkeleinstellung hat beim Kaltstart Funktionsstörung. Es liegt ein unplausibles Signal vor. | 1 | Powertrain |
| P050F00 | OBD relevant DTC in RBS. For detailed information read Fault Memory of RBS | 1 | Powertrain |
| P050F85 | The vacuum in the brake booster is too low. There is a signal above the permissible limit value. | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P050B00 | Abnormal quotient of integrated deviation of ignition angle efficiency setpoint and actual ignition angle efficiency during catalyst heating active and accumulated time spent in idle speed is detected, PCM sets DTC | 2 | Powertrain |
| P050B64 | Die Zndwinkeleinstellung hat beim Kaltstart Funktionsstörung. Es liegt ein unplausibles Signal vor. | 1 | Powertrain |
| P050F00 | OBD relevant DTC in RBS. For detailed information read Fault Memory of RBS | 1 | Powertrain |
| P050F85 | The vacuum in the brake booster is too low. There is a signal above the permissible limit value. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 5
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Toyota | P0500 (Open) | |
| Toyota | P0500 (Engine ECU) | |
| Ford | Output shaft speed sensor: P0503 | code P215B |
| Mazda | Output shaft speed sensor: P0503 | code P215B |
| Volkswagen | Notes on event memory entries P050B | code P13EA |
Live data 2
| Brand | Parameter | Units | Min | Max |
|---|---|---|---|---|
| Toyota | P0500 (Open) | - | 1 | 1 |
| Toyota | P0500 (Engine ECU) | - | 2 | 2 |
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.