Fault code lookup

Results for “P060”

Fault codes 396

Results match keywords in the stored descriptions. Codes you typed are shown first.

CodeDescriptionBrandsSystem
P060743EEPROM error occurred while reading/writing Variant information1Powertrain
P060744The control unit has a malfunction. Data Memory Failure.2Powertrain
P060746The Control unit has a malfunction. Calibration / Parameter Memory Failure.1Powertrain
P060747Fault symptom for L3 SMU reported fault1Powertrain
P060748Diagnosis for data read error from Ring buffer1Powertrain
P060749Fault symptom for L3 BIST test fault2Powertrain
P06074AECU Fault Assembly1Powertrain
P06074BControl Module Performance1Powertrain
P060751Das Steuergerät hat Funktionsstörung. Das Bauteil ist nicht programmiert.2Powertrain
P060753The control unit has a malfunction. The component is deactivated.1Powertrain
Show 15 more matches on this page
CodeDescriptionBrandsSystem
P060754General Device Error - Missing Calibration1Powertrain
P060755The control unit has a malfunction. The component is not configured.1Powertrain
P060756The control unit has a malfunction. An incorrect or incompatible configuration was detected.1Powertrain
P060757Software Version Mismatch1Powertrain
P060761Das Steuergerät hat Funktionsstörung.Die Signalberechnung ist fehlerhaft.1Powertrain
P060762The control unit has a malfunction. The signal comparison is faulty.1Powertrain
P060764The control unit has a malfunction. There is an implausible signal.1Powertrain
P060779Control Module Performance1Powertrain
P060781Control Module Performance invalid serial data received1Powertrain
P060782Control Module Performance alive / sequence counter incorrect / not updated1Powertrain
P060787Control Module Performance1Powertrain
P060789NVM api request fail1Powertrain
P06078FControl Module Performance The signal or message is erratic.1Powertrain
P060791The control unit has a malfunction. The parameter is outside the permissible range.1Powertrain
P060792Incorrect Torque during execution 3PS (SS1) is detected by L21Powertrain
CodeDescriptionBrandsSystem
P060754General Device Error - Missing Calibration1Powertrain
P060755The control unit has a malfunction. The component is not configured.1Powertrain
P060756The control unit has a malfunction. An incorrect or incompatible configuration was detected.1Powertrain
P060757Software Version Mismatch1Powertrain
P060761Das Steuergerät hat Funktionsstörung.Die Signalberechnung ist fehlerhaft.1Powertrain
P060762The control unit has a malfunction. The signal comparison is faulty.1Powertrain
P060764The control unit has a malfunction. There is an implausible signal.1Powertrain
P060779Control Module Performance1Powertrain
P060781Control Module Performance invalid serial data received1Powertrain
P060782Control Module Performance alive / sequence counter incorrect / not updated1Powertrain
P060787Control Module Performance1Powertrain
P060789NVM api request fail1Powertrain
P06078FControl Module Performance The signal or message is erratic.1Powertrain
P060791The control unit has a malfunction. The parameter is outside the permissible range.1Powertrain
P060792Incorrect Torque during execution 3PS (SS1) is detected by L21Powertrain
Advanced: scanner vehicle and live-data matches

Vehicles 8

Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.

BrandModel / variantDetails
Mercedes-BenzENV_P060000_EDR01_Mode
Mercedes-BenzENV_P060000_EDR01_PCB_Temp
Mercedes-BenzENV_P060000_EDR01_HV_Current
Mercedes-BenzENV_P060000_EDR01_HV_Voltage
Mercedes-BenzENV_P060000_EDR01_LV_Current
Mercedes-BenzENV_P060000_EDR01_LV_Voltage
Mercedes-BenzENV_P060000_EDR01_HV_Stage_Temp
Mercedes-BenzENV_P060000_EDR01_LV_Stage_Temp

Live data 12

BrandParameterUnitsMinMax
Mercedes-BenzENV_P060000_EDR01_Mode---
Mercedes-BenzENV_P060000_EDR01_PCB_Temp---
Mercedes-BenzENV_P060000_EDR01_HV_Voltage---
Mercedes-BenzENV_P060000_EDR01_HV_Current---
Mercedes-BenzENV_P060000_EDR01_LV_Voltage---
Mercedes-BenzENV_P060000_EDR01_LV_Current---
Mercedes-BenzENV_P060400_EDR02_Fahrer_bremst---
Mercedes-BenzENV_P060000_EDR01_LV_Stage_Temp---
Mercedes-BenzENV_P060000_EDR01_HV_Stage_Temp---
Mercedes-BenzENV_P060000_EDR01_Frequency_Count---
Mercedes-BenzENV_P060704_EDR01_Frequency_Count---
Mercedes-BenzENV_P060000_EDR01_Operation_Cycle_Count---

These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.

OpenDTC - independent fault code reference