Results for “P13D”
Fault codes 35
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P13D0 | Brake stroke sensor plausibility | 5 | Powertrain |
| P13D1 | Brake stroke sensor circuit high | 5 | Powertrain |
| P13D2 | Brake stroke sensor circuit low | 6 | Powertrain |
| P13D3 | Brake stroke sensor offset | 5 | Powertrain |
| P13D4 | NO. 213 battery voltage sampling wire loop fault | 8 | Powertrain |
| P13D5 | Transmission range sensor circuit | 10 | Powertrain |
| P13D6 | NO. 215 battery voltage sampling wire loop fault | 9 | Powertrain |
| P13D7 | NO. 216 battery voltage sampling wire loop fault | 8 | Powertrain |
| P13D8 | NO. 217 battery voltage sampling wire loop fault | 3 | Powertrain |
| P13D9 | NO. 218 battery voltage sampling wire loop fault | 3 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P13DA | Sensor for cylinder 5 internal pressure, electrical fault | 5 | Powertrain |
| P13DB | Cylinder 5 internal pressure sensor: short to ground; No signal/communication | 4 | Powertrain |
| P13DC | NO. 221 battery voltage sampling wire loop fault | 8 | Powertrain |
| P13DD | Cylinder 6 internal pressure sensor: short to plus; Mechanical failure | 9 | Powertrain |
| P13DE | Cylinder 6 internal pressure sensor: short to ground; No or incorrect basic setting / adaptation | 9 | Powertrain |
| P13DF | NO. 224 battery voltage sampling wire loop fault | 8 | Powertrain |
| P13D000 | Charge point does not support protocol version (charging protocol) | 1 | Powertrain |
| P13D056 | The power supply unit does not support the protocol version of the Powerline Communications. | 1 | Powertrain |
| P13D100 | RCS Communication could not be established | 2 | Powertrain |
| P13D200 | Could not connect SSL socket RCS (detection over timeout) | 2 | Powertrain |
| P13D202 | SCC Root Certificate Error Intern - General Signal Failure | 1 | Powertrain |
| P13D392 | The contactor of the charging station was not opened or closed. | 1 | Powertrain |
| P13D39A | The specified time until the start of the charging process was exceeded. Component or System Operating Conditions | 1 | Powertrain |
| P13D400 | Sensor for internal pressure of cylinder 3 Electrical error | 1 | Powertrain |
| P13D500 | Sensor for internal pressure of cylinder 3 Short circuit to ground | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P13DA | Sensor for cylinder 5 internal pressure, electrical fault | 5 | Powertrain |
| P13DB | Cylinder 5 internal pressure sensor: short to ground; No signal/communication | 4 | Powertrain |
| P13DC | NO. 221 battery voltage sampling wire loop fault | 8 | Powertrain |
| P13DD | Cylinder 6 internal pressure sensor: short to plus; Mechanical failure | 9 | Powertrain |
| P13DE | Cylinder 6 internal pressure sensor: short to ground; No or incorrect basic setting / adaptation | 9 | Powertrain |
| P13DF | NO. 224 battery voltage sampling wire loop fault | 8 | Powertrain |
| P13D000 | Charge point does not support protocol version (charging protocol) | 1 | Powertrain |
| P13D056 | The power supply unit does not support the protocol version of the Powerline Communications. | 1 | Powertrain |
| P13D100 | RCS Communication could not be established | 2 | Powertrain |
| P13D200 | Could not connect SSL socket RCS (detection over timeout) | 2 | Powertrain |
| P13D202 | SCC Root Certificate Error Intern - General Signal Failure | 1 | Powertrain |
| P13D392 | The contactor of the charging station was not opened or closed. | 1 | Powertrain |
| P13D39A | The specified time until the start of the charging process was exceeded. Component or System Operating Conditions | 1 | Powertrain |
| P13D400 | Sensor for internal pressure of cylinder 3 Electrical error | 1 | Powertrain |
| P13D500 | Sensor for internal pressure of cylinder 3 Short circuit to ground | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.