Results for “C120”
Fault codes 50
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C1200 | Torque sensor power supply voltage failure | 30 | Chassis |
| C1201 | Motor circuit short to battery or ground | 30 | Chassis |
| C1202 | Current following abnormality | 29 | Chassis |
| C1203 | Current is too large | 24 | Chassis |
| C1204 | Motor current too low | 24 | Chassis |
| C1205 | Power supply voltage too high | 29 | Chassis |
| C1206 | Power supply voltage too low | 28 | Chassis |
| C1207 | Seat lumbar height switch - passenger's | 29 | Chassis |
| C1208 | Memory reading and writing error | 23 | Chassis |
| C1209 | Seat depth switch - passenger's | 20 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C120A | Ignition signal lost | 11 | Chassis |
| C120B | Relay does not close | 5 | Chassis |
| C120C | Torque sensor power supply is seriously abnormal | 15 | Chassis |
| C120D | Steering angle invalid | 9 | Chassis |
| C120E | Steering angle not initialized | 9 | Chassis |
| C120F | Steering angle not calibrated | 12 | Chassis |
| C120000 | Functional failure detection (EPB latching failure) | 1 | Chassis |
| C120001 | If the sensor signal is out of the specified range for certain amount of time, HECU sets DTC | 1 | Chassis |
| C120046 | No description available | 1 | Chassis |
| C120094 | No description available | 1 | Chassis |
| C120100 | WSS front-LH range / performance / intermittent | 1 | Chassis |
| C120101 | Brake switch error | 1 | Chassis |
| C120200 | If VCC5T_P is out of range after a time x the failure will be detect If VCC5T_P is out of range after a time x the failure will be detect(short cicuit to GND) | 2 | Chassis |
| C120201 | Electronic Stability Control (ESC) off switch signal error | 1 | Chassis |
| C120208 | The SCC Module sets DTC when it received abnormal Wheel Speed Sensor(Left Front) CAN message from ESP(ESC) via CAN | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C120A | Ignition signal lost | 11 | Chassis |
| C120B | Relay does not close | 5 | Chassis |
| C120C | Torque sensor power supply is seriously abnormal | 15 | Chassis |
| C120D | Steering angle invalid | 9 | Chassis |
| C120E | Steering angle not initialized | 9 | Chassis |
| C120F | Steering angle not calibrated | 12 | Chassis |
| C120000 | Functional failure detection (EPB latching failure) | 1 | Chassis |
| C120001 | If the sensor signal is out of the specified range for certain amount of time, HECU sets DTC | 1 | Chassis |
| C120046 | No description available | 1 | Chassis |
| C120094 | No description available | 1 | Chassis |
| C120100 | WSS front-LH range / performance / intermittent | 1 | Chassis |
| C120101 | Brake switch error | 1 | Chassis |
| C120200 | If VCC5T_P is out of range after a time x the failure will be detect If VCC5T_P is out of range after a time x the failure will be detect(short cicuit to GND) | 2 | Chassis |
| C120201 | Electronic Stability Control (ESC) off switch signal error | 1 | Chassis |
| C120208 | The SCC Module sets DTC when it received abnormal Wheel Speed Sensor(Left Front) CAN message from ESP(ESC) via CAN | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 1
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Toyota | Communication between ECM and system power control module (C120) lost | code U0120 |
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.