Results for “C103”
Fault codes 33
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C1030 | Low-pressure sensor, signal 1: Electrical fault | 13 | Chassis |
| C1031 | Low-pressure sensor, signal 2: Electrical fault | 17 | Chassis |
| C1032 | Low-pressure sensor, plausibility | 19 | Chassis |
| C1033 | Isolation Switch 2 | 11 | Chassis |
| C1034 | Left switch | 11 | Chassis |
| C1035 | Right switch | 15 | Chassis |
| C1036 | Damper temperature | 14 | Chassis |
| C1037 | High voltage shutdown fault | 12 | Chassis |
| C1038 | Front left - Damper drive | 8 | Chassis |
| C1039 | Front left - Damper return | 6 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C103A | Front right - Damper drive | 4 | Chassis |
| C103B | Front right - Damper return | 2 | Chassis |
| C103C | Notice: For this procedure to operate DTC C103E.64 and.64 cannot be set current, see service manual | 6 | Chassis |
| C103D | Rear left - Damper return | 2 | Chassis |
| C103E | Notice: For this procedure to operate DTC.64 and C103C.64 cannot be set current, see service manual | 5 | Chassis |
| C103F | Sensor system, hybrid brake actuation changeover (SBA): Electrical fault | 4 | Chassis |
| C103000 | EPB failure detection (release level) | 1 | Chassis |
| C103100 | Wheel acceleration sensor front left short to ground | 1 | Chassis |
| C103101 | Wheel speed sensor rear-LH open/short | 1 | Chassis |
| C1031F1 | Fault Adaptive suspension pressure sender - residual pressure for rear axle lowering too low is entered in the fault memory of the %str_steuergeraet | 1 | Chassis |
| C103200 | Wheel acceleration sensor front left short to battery or open | 1 | Chassis |
| C103202 | Wheel speed sensor rear-LH air gap | 1 | Chassis |
| C103300 | Fault in rear right wheel speed sensor(temporary) | 1 | Chassis |
| C103302 | Wheel speed sensor rear-LH speed jump | 1 | Chassis |
| C103313 | Unexpected reset - loss of Cl30 | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C103A | Front right - Damper drive | 4 | Chassis |
| C103B | Front right - Damper return | 2 | Chassis |
| C103C | Notice: For this procedure to operate DTC C103E.64 and.64 cannot be set current, see service manual | 6 | Chassis |
| C103D | Rear left - Damper return | 2 | Chassis |
| C103E | Notice: For this procedure to operate DTC.64 and C103C.64 cannot be set current, see service manual | 5 | Chassis |
| C103F | Sensor system, hybrid brake actuation changeover (SBA): Electrical fault | 4 | Chassis |
| C103000 | EPB failure detection (release level) | 1 | Chassis |
| C103100 | Wheel acceleration sensor front left short to ground | 1 | Chassis |
| C103101 | Wheel speed sensor rear-LH open/short | 1 | Chassis |
| C1031F1 | Fault Adaptive suspension pressure sender - residual pressure for rear axle lowering too low is entered in the fault memory of the %str_steuergeraet | 1 | Chassis |
| C103200 | Wheel acceleration sensor front left short to battery or open | 1 | Chassis |
| C103202 | Wheel speed sensor rear-LH air gap | 1 | Chassis |
| C103300 | Fault in rear right wheel speed sensor(temporary) | 1 | Chassis |
| C103302 | Wheel speed sensor rear-LH speed jump | 1 | Chassis |
| C103313 | Unexpected reset - loss of Cl30 | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 6
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Daewoo | Notice: For this procedure to operate DTC C103E.64 and.64 cannot be set current, see service manual | code C103C |
| GM | Notice: For this procedure to operate DTC C103E.64 and.64 cannot be set current, see service manual | code C103C |
| Holden | Notice: For this procedure to operate DTC C103E.64 and.64 cannot be set current, see service manual | code C103C |
| Daewoo | Notice: For this procedure to operate DTC.64 and C103C.64 cannot be set current, see service manual | code C103E |
| GM | Notice: For this procedure to operate DTC.64 and C103C.64 cannot be set current, see service manual | code C103E |
| Holden | Notice: For this procedure to operate DTC.64 and C103C.64 cannot be set current, see service manual | code C103E |
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.