Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C164308 | If Yaw/Ay/Ax CAN message is not received, HECU sets DTC | 1 | Chassis |
| C1644FA | Automatic alignment for production erroneous - Sensor alignment too far to the right | 1 | Chassis |
| C164500 | End of line alignment erroneous - signal quality insufficient | 1 | Chassis |
| C164608 | The SCC Module sets DTC when it received abnormal gear position message from TCM via CAN | 1 | Chassis |
| C164686 | If invalid TCU CAN message is received, LDWS ECU sets DTC | 1 | Chassis |
| C164700 | CAN: hardware error(sensor cluster) | 1 | Chassis |
| C165008 | If abnormal SCC CAN message is received, HECU sets DTC | 1 | Chassis |
| C165100 | If EPB CAN message is not received, IGPM sets DTC | 1 | Chassis |
| C165108 | If EPB CAN message is not received, HECU sets DTC | 1 | Chassis |
| C165387 | If a message is not received from Cluster via CAN lines for a certain period of time, LKAS generates and turns on the Malfunction Indicator Lamp | 1 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C165487 | While communicating with the Cluster module via CAN, if a signal is not received from Cluster, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C165587 | While communicating with the TCU module via CAN, if a signal is received from TCU in irregular cycle, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C165608 | If invalid Cluster signal is received for more than 5 sec, EPB ECU sets DTC | 1 | Chassis |
| C165687 | While communicating with the Cluster module via CAN, if the CLU message is not received for a certain period of time, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C165900 | If SAS CAN message is not received, IGPM sets DTC | 1 | Chassis |
| C165987 | CAN communication: Steering Angle Sensor (SAS) message not received | 1 | Chassis |
| C166700 | If SCC CAN message is not received, IGPM sets DTC | 1 | Chassis |
| C166D00 | No description available | 1 | Chassis |
| C167282 | While communicating with Steering Angle Sensor (SAS) via CAN, if the transmission cycle of SAS signals is not normal, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C167283 | While communicating with Steering Angle Sensor (SAS) via CAN, if an invalid signal is received from SAS, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C167286 | If invalid SAS CAN message is received, LDWS ECU sets DTC | 1 | Chassis |
| C167287 | While communicating with Steering Angle Sensor (SAS) via CAN, if a valid signal is not received from SAS, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C167682 | The LKAS module monitors CAN LINE and abnormal MDPS CAN message is received, LKAS sets DTC and turns the MIL on | 1 | Chassis |
| C167683 | LKAS checks the checksum of a response message from MDPS to determine whether the message is reliable. If the message is not valid, it generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C168700 | If MDPS CAN message is not received, IGPM sets DTC | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C165487 | While communicating with the Cluster module via CAN, if a signal is not received from Cluster, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C165587 | While communicating with the TCU module via CAN, if a signal is received from TCU in irregular cycle, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C165608 | If invalid Cluster signal is received for more than 5 sec, EPB ECU sets DTC | 1 | Chassis |
| C165687 | While communicating with the Cluster module via CAN, if the CLU message is not received for a certain period of time, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C165900 | If SAS CAN message is not received, IGPM sets DTC | 1 | Chassis |
| C165987 | CAN communication: Steering Angle Sensor (SAS) message not received | 1 | Chassis |
| C166700 | If SCC CAN message is not received, IGPM sets DTC | 1 | Chassis |
| C166D00 | No description available | 1 | Chassis |
| C167282 | While communicating with Steering Angle Sensor (SAS) via CAN, if the transmission cycle of SAS signals is not normal, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C167283 | While communicating with Steering Angle Sensor (SAS) via CAN, if an invalid signal is received from SAS, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C167286 | If invalid SAS CAN message is received, LDWS ECU sets DTC | 1 | Chassis |
| C167287 | While communicating with Steering Angle Sensor (SAS) via CAN, if a valid signal is not received from SAS, the LKAS module generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C167682 | The LKAS module monitors CAN LINE and abnormal MDPS CAN message is received, LKAS sets DTC and turns the MIL on | 1 | Chassis |
| C167683 | LKAS checks the checksum of a response message from MDPS to determine whether the message is reliable. If the message is not valid, it generates the fault code and turns on the Malfunction Indicator Lamp | 1 | Chassis |
| C168700 | If MDPS CAN message is not received, IGPM sets DTC | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.