Results for “B100”
Fault codes 142
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| B100715 | Mode actuator circuit open or short to battery (+) | 1 | Body |
| B10071A | Passenger seat belt tensioner igniter, insufficient resistance | 1 | Body |
| B100728 | Sensor 2 of the pressure and temperature sensor for refrigerant between compressor and condenser has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100752 | This DTC is set when variant coding is incorrectly performed as if AFLS option is installed on the vehicle even though real vehicle has not AFLS on the CAN BUS | 1 | Body |
| B100753 | Igniter 1 for passenger seat belt tensioner | 1 | Body |
| B100755 | This DTC is set when variant coding is incorrectly performed as if AFLS option is not installed on the vehicle even though real vehicle has AFLS on the CAN BUS | 1 | Body |
| B100777 | Mode actuator position control error | 1 | Body |
| B100791 | Sensor 2 of the pressure and temperature sensor for refrigerant between compressor and condenser has a malfunction. The parameter is outside the permissible range. | 1 | Body |
| B100800 | Connected Control Unit (CCU) interior Network Access Device (NAD) overheating (stage 1) | 1 | Body |
| B100811 | Front passenger seat temperature control actuator circuit short to ground | 1 | Body |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| B100815 | Front passenger seat temperature control actuator circuit open or short to battery (+) | 1 | Body |
| B100828 | Sensor 1 of the pressure and temperature sensor for the suction line has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100852 | When setting variant coding, if the MDPS option is added to the vehicle not equipped with MDPS, sets DTC | 1 | Body |
| B100853 | Rear belt tensioner igniter on front passenger side deactivated | 1 | Body |
| B100855 | When setting variant coding, if the MDPS option is not added to the vehicle equipped with MDPS, sets DTC | 1 | Body |
| B100877 | Front passenger seat temperature control actuator position control error | 1 | Body |
| B100886 | Notpfad Ansteuerung durch ESP | 1 | Body |
| B100891 | Sensor 1 of the pressure and temperature sensor for the suction line has a malfunction. The parameter is outside the permissible range. | 1 | Body |
| B100900 | Connected Control Unit (CCU) interior Network Access Device (NAD) overheating (stage 2) | 1 | Body |
| B100911 | Driver seat temperature control actuator circuit short to ground | 1 | Body |
| B100915 | Driver seat temperature control actuator circuit open or short to battery (+) | 1 | Body |
| B100928 | Sensor 2 of the pressure and temperature sensor for the suction line has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100952 | This DTC is set when variant coding is incorrectly performed as if 4WD option is installed on the vehicle even though real vehicle has not 4WD on the CAN BUS | 1 | Body |
| B100953 | Rear belt tensioner igniter on driver side deactivated | 1 | Body |
| B100955 | This DTC is set when variant coding is incorrectly performed as if 4WD option is not installed on the vehicle even though real vehicle has 4WD on the CAN BUS | 1 | Body |
| Code | Description | Brands | System |
|---|---|---|---|
| B100815 | Front passenger seat temperature control actuator circuit open or short to battery (+) | 1 | Body |
| B100828 | Sensor 1 of the pressure and temperature sensor for the suction line has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100852 | When setting variant coding, if the MDPS option is added to the vehicle not equipped with MDPS, sets DTC | 1 | Body |
| B100853 | Rear belt tensioner igniter on front passenger side deactivated | 1 | Body |
| B100855 | When setting variant coding, if the MDPS option is not added to the vehicle equipped with MDPS, sets DTC | 1 | Body |
| B100877 | Front passenger seat temperature control actuator position control error | 1 | Body |
| B100886 | Notpfad Ansteuerung durch ESP | 1 | Body |
| B100891 | Sensor 1 of the pressure and temperature sensor for the suction line has a malfunction. The parameter is outside the permissible range. | 1 | Body |
| B100900 | Connected Control Unit (CCU) interior Network Access Device (NAD) overheating (stage 2) | 1 | Body |
| B100911 | Driver seat temperature control actuator circuit short to ground | 1 | Body |
| B100915 | Driver seat temperature control actuator circuit open or short to battery (+) | 1 | Body |
| B100928 | Sensor 2 of the pressure and temperature sensor for the suction line has a malfunction. The signal offset is outside the permissible range. | 1 | Body |
| B100952 | This DTC is set when variant coding is incorrectly performed as if 4WD option is installed on the vehicle even though real vehicle has not 4WD on the CAN BUS | 1 | Body |
| B100953 | Rear belt tensioner igniter on driver side deactivated | 1 | Body |
| B100955 | This DTC is set when variant coding is incorrectly performed as if 4WD option is not installed on the vehicle even though real vehicle has 4WD on the CAN BUS | 1 | Body |
Advanced: scanner vehicle and live-data matches
Vehicles 1
| Brand | Model / variant | Details |
|---|---|---|
| Toyota | GDB100 | code GDB100 · JP · engine 3GD-FTV |
Live data 8
| Brand | Parameter | Units | Min | Max |
|---|---|---|---|---|
| Mercedes-Benz | ERR_B1000_0 | - | - | - |
| Mercedes-Benz | ERR_B1000_4 | - | - | - |
| Mercedes-Benz | ERR_B1000_3 | - | - | - |
| Smart | ERR_B1000_4 | - | - | - |
| Smart | ERR_B1000_3 | - | - | - |
| Smart | ERR_B1000_0 | - | - | - |
| Mercedes-Benz | Enable_DEF@SAM906.Istwerte_RelativeURL@b100057%82882 | - | - | - |
| Sprinter | Enable_DEF@SAM906.Istwerte_RelativeURL@b100057%82882 | - | - | - |
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.