Results for “P”
Fault codes 32,087
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P28C709 | Phases U-V-W of clutch actuator 1 have a malfunction. There is a component fault. | 1 | Powertrain |
| P28C713 | Cluth control actuator phase open circut | 1 | Powertrain |
| P28C716 | Phases U-V-W of clutch actuator 1 have a malfunction. The limit value for electrical voltage has not been attained. | 1 | Powertrain |
| P28C764 | Cluth actuator phase current plausibility fault | 1 | Powertrain |
| P28C777 | Phases U-V-W of clutch actuator 1 have a malfunction. The commanded position cannot be reached. | 1 | Powertrain |
| P28C7A2 | Phases U-V-W of clutch actuator 1 have a malfunction. The system voltage is too low. | 1 | Powertrain |
| P28CB12 | Cluth position sensor short to battery electrical fault | 1 | Powertrain |
| P28CB16 | Cluth position sensor supply voltage too low | 1 | Powertrain |
| P28CB17 | Cluth position sensor supply voltage too high | 1 | Powertrain |
| P28CB84 | Dog Clutch Position - Out of Range Low | 1 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P28CB93 | Cluth position sensor supply voltage communication error to CY329 | 1 | Powertrain |
| P28CC16 | Performance issue of cluth position sensor e.g. due to low supply voltage | 1 | Powertrain |
| P28D100 | The output to clutch actuator 1 has overtemperature or the current value is too high. | 1 | Powertrain |
| P28D164 | Cluth actuator bridge driver powerstage temperature plausibility fault. | 1 | Powertrain |
| P28ED09 | Pump 2 Diagnostics (slow -100ms) unknown fault | 1 | Powertrain |
| P28ED16 | Pump Board motor2 bridge voltage - Too Low | 1 | Powertrain |
| P28ED17 | Pump Board motor2 bridge voltage - Too High | 1 | Powertrain |
| P28ED19 | Pump 2: The OCP status bits information is obtained using SPI read | 1 | Powertrain |
| P290617 | The power supply of the electric oil separator has a short circuit to positive. The limit value for electrical voltage has been exceeded. | 1 | Powertrain |
| P290700 | The temperature of the electric oil separator is too high. | 1 | Powertrain |
| P290A08 | The electric oil separator has a malfunction. There is a signal fault or the message is faulty. | 1 | Powertrain |
| P290A11 | The electric oil separator has a malfunction. There is a short circuit to ground. | 1 | Powertrain |
| P290A15 | The electric oil separator has a malfunction. There is a short circuit to positive or an open circuit. | 1 | Powertrain |
| P292800 | Contact 'Negative pole' of contactor B in the high-voltage battery is jammed open. | 1 | Powertrain |
| P292900 | Contact 'Negative pole' of contactor B in the high-voltage battery is jammed open. | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P28CB93 | Cluth position sensor supply voltage communication error to CY329 | 1 | Powertrain |
| P28CC16 | Performance issue of cluth position sensor e.g. due to low supply voltage | 1 | Powertrain |
| P28D100 | The output to clutch actuator 1 has overtemperature or the current value is too high. | 1 | Powertrain |
| P28D164 | Cluth actuator bridge driver powerstage temperature plausibility fault. | 1 | Powertrain |
| P28ED09 | Pump 2 Diagnostics (slow -100ms) unknown fault | 1 | Powertrain |
| P28ED16 | Pump Board motor2 bridge voltage - Too Low | 1 | Powertrain |
| P28ED17 | Pump Board motor2 bridge voltage - Too High | 1 | Powertrain |
| P28ED19 | Pump 2: The OCP status bits information is obtained using SPI read | 1 | Powertrain |
| P290617 | The power supply of the electric oil separator has a short circuit to positive. The limit value for electrical voltage has been exceeded. | 1 | Powertrain |
| P290700 | The temperature of the electric oil separator is too high. | 1 | Powertrain |
| P290A08 | The electric oil separator has a malfunction. There is a signal fault or the message is faulty. | 1 | Powertrain |
| P290A11 | The electric oil separator has a malfunction. There is a short circuit to ground. | 1 | Powertrain |
| P290A15 | The electric oil separator has a malfunction. There is a short circuit to positive or an open circuit. | 1 | Powertrain |
| P292800 | Contact 'Negative pole' of contactor B in the high-voltage battery is jammed open. | 1 | Powertrain |
| P292900 | Contact 'Negative pole' of contactor B in the high-voltage battery is jammed open. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.