Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C1634 | ASIC detected motor over-current | 4 | Chassis |
| C1635 | Vacuum pump relay control failure | 5 | Chassis |
| C1636 | Vacuum pump relay control failure | 4 | Chassis |
| C1637 | Vacuum pump relay control failure | 3 | Chassis |
| C1638 | Wheel state suppression electronic stability control (ESC) function - signal calculation failed | 9 | Chassis |
| C1639 | Inconsistency between ignition switch positive and master wake-up transmitted by Built-in System Interface (BSI) | 5 | Chassis |
| C163A | Duty cycle filter exceeds threshold | 8 | Chassis |
| C163D | Yaw rate sensor | 9 | Chassis |
| C163E | No description available | 2 | Chassis |
| C1640 | Vehicle speed sensor driving direction failure | 22 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C1641 | Motor is open circuit or short circuit | 18 | Chassis |
| C1642 | The actual current is much higher than computing the goal of the current | 7 | Chassis |
| C1643 | Motor current is too high | 8 | Chassis |
| C1644 | Failed to disable EEPROM | 13 | Chassis |
| C1645 | The actual current is far lower than the calculation of the target current | 8 | Chassis |
| C1646 | SAS Missing Message | 6 | Chassis |
| C1647 | CAN hardware fault - sensor channel | 6 | Chassis |
| C1648 | YRS Missing Message | 3 | Chassis |
| C1649 | No description available | 2 | Chassis |
| C164A | Tire deflation detection function programming failure | 8 | Chassis |
| C164B | Tire compatibility failure | 8 | Chassis |
| C164C | Brake pedal information failure | 11 | Chassis |
| C164D | No description available | 1 | Chassis |
| C164E | Stop SW signal error | 3 | Chassis |
| C164F | No description available | 2 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C1641 | Motor is open circuit or short circuit | 18 | Chassis |
| C1642 | The actual current is much higher than computing the goal of the current | 7 | Chassis |
| C1643 | Motor current is too high | 8 | Chassis |
| C1644 | Failed to disable EEPROM | 13 | Chassis |
| C1645 | The actual current is far lower than the calculation of the target current | 8 | Chassis |
| C1646 | SAS Missing Message | 6 | Chassis |
| C1647 | CAN hardware fault - sensor channel | 6 | Chassis |
| C1648 | YRS Missing Message | 3 | Chassis |
| C1649 | No description available | 2 | Chassis |
| C164A | Tire deflation detection function programming failure | 8 | Chassis |
| C164B | Tire compatibility failure | 8 | Chassis |
| C164C | Brake pedal information failure | 11 | Chassis |
| C164D | No description available | 1 | Chassis |
| C164E | Stop SW signal error | 3 | Chassis |
| C164F | No description available | 2 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.