Results for “P200”
Fault codes 81
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P200500 | Generic fault for swirl H-bridge fault | 1 | Powertrain |
| P200501 | Coolant temperature sensor: short circuit to ground | 1 | Powertrain |
| P200502 | Coolant temperature sensor: short circuit to positive or open circuit | 1 | Powertrain |
| P200508 | Coolant temperature sensor: short circuit in wiring | 1 | Powertrain |
| P200600 | PCM sets DTC if the PCM detects close stuck of the VCM actuator | 2 | Powertrain |
| P200601 | Swirl drive fault (current reduction) for positive duty cycle | 1 | Powertrain |
| P200602 | Intake air temperature sensor: short circuit to positive or open circuit | 1 | Powertrain |
| P200603 | Swirl drive fault (short circuit) for positive duty cycle | 1 | Powertrain |
| P200604 | Swirl drive fault (undervoltage) for positive duty cycle | 1 | Powertrain |
| P200608 | Intake air temperature sensor: short circuit to ground | 1 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P20060A | Swirl drive fault (current limitation) for negative duty cycle | 1 | Powertrain |
| P20060B | Swirl drive fault (current reduction) for negative duty cycle | 1 | Powertrain |
| P20060C | Swirl drive fault (over temperature) for negative duty cycle | 1 | Powertrain |
| P20060D | Swirl drive fault (short circuit) for negative duty cycle | 1 | Powertrain |
| P20060E | Swirl drive fault (undervoltage) for negative duty cycle | 1 | Powertrain |
| P200700 | Faulty TCU RAM CAN - controller 2 | 1 | Powertrain |
| P200701 | Pressure sensor: short circuit to positive | 1 | Powertrain |
| P200702 | Pressure sensor: short circuit to ground or open circuit | 1 | Powertrain |
| P200708 | Pressure sensor: signal implausible | 1 | Powertrain |
| P200800 | PCM sets DTC if the PCM detects open in VCM motor control circuit | 2 | Powertrain |
| P200801 | Swirl drive fault (open circuit) for negative duty cycle | 1 | Powertrain |
| P200808 | Heating of component right O2 sensor before TWC: heating capacity is too low | 1 | Powertrain |
| P200813 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung. Es liegt eine Unterbrechung vor. | 1 | Powertrain |
| P200814 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung. Es liegt ein Kurzschluss nach Masse oder eine Unterbrechung vor. | 1 | Powertrain |
| P20082B | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung.Die elektrische Leitungen haben Kurzschluss untereinander. | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P20060A | Swirl drive fault (current limitation) for negative duty cycle | 1 | Powertrain |
| P20060B | Swirl drive fault (current reduction) for negative duty cycle | 1 | Powertrain |
| P20060C | Swirl drive fault (over temperature) for negative duty cycle | 1 | Powertrain |
| P20060D | Swirl drive fault (short circuit) for negative duty cycle | 1 | Powertrain |
| P20060E | Swirl drive fault (undervoltage) for negative duty cycle | 1 | Powertrain |
| P200700 | Faulty TCU RAM CAN - controller 2 | 1 | Powertrain |
| P200701 | Pressure sensor: short circuit to positive | 1 | Powertrain |
| P200702 | Pressure sensor: short circuit to ground or open circuit | 1 | Powertrain |
| P200708 | Pressure sensor: signal implausible | 1 | Powertrain |
| P200800 | PCM sets DTC if the PCM detects open in VCM motor control circuit | 2 | Powertrain |
| P200801 | Swirl drive fault (open circuit) for negative duty cycle | 1 | Powertrain |
| P200808 | Heating of component right O2 sensor before TWC: heating capacity is too low | 1 | Powertrain |
| P200813 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung. Es liegt eine Unterbrechung vor. | 1 | Powertrain |
| P200814 | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung. Es liegt ein Kurzschluss nach Masse oder eine Unterbrechung vor. | 1 | Powertrain |
| P20082B | Die Ansteuerung der Ladungsbewegungsklappe (Zylinderreihe 1) hat einen elektrischen Fehler oder Unterbrechung.Die elektrische Leitungen haben Kurzschluss untereinander. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 7
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Mercedes-Benz | PRES_Temperaturschwelle_50ppp200_C | |
| Fiat | There is a DTC /P2002 in the fault memory because the particulate filter is clogged | code P1206 |
| Chrysler | P2009 SHORT RUNNER SOLENOID CIRCUIT LOW or CHARGE AIR COOLER CIRCULATION PUMP CONTROL CKT | code P023A |
| Chrysler | P2008 SHORT RUNNER SOLENOID CIRCUIT or CHARGE AIR COOLER CIRCULATION PUMP CONTROL CKT LOW | code P023B |
| Ford | If DTC or P2002 is set, perform this procedure to regenerate the diesel particulate filter | code P1206 |
| Mazda | If DTC or P2002 is set, perform this procedure to regenerate the diesel particulate filter | code P1206 |
| Hyundai | If faulty VSA motor control circuit is detected for more than 2 sec., ECM sets DTC P200900. This fault might be caused by open or short to ground in control circuit of VSA. If open in control circuit is detected, DTC is also set | code P201500 |
Live data 1
| Brand | Parameter | Units | Min | Max |
|---|---|---|---|---|
| Mercedes-Benz | PRES_Temperaturschwelle_50ppp200_C | - | -40 | 140 |
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.