Results for “C120”
Fault codes 50
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C120209 | Brake disk overheating (traction control system) | 1 | Chassis |
| C120300 | WSS front-RH open/short | 1 | Chassis |
| C120301 | Mode switch signal error | 1 | Chassis |
| C120400 | WSS front-RH range / performance / intermittent | 1 | Chassis |
| C120500 | Lane Keeping Assist System (LKAS) switch circuit open or short or stuck | 1 | Chassis |
| C120508 | The SCC Module sets DTC when it received abnormal Wheel Speed Sensor(Right Front) CAN message from ESP(ESC) via CAN | 1 | Chassis |
| C120554 | No description available | 1 | Chassis |
| C120581 | CAN communication: instrument panel signal error | 1 | Chassis |
| C120600 | Ventil Plausibilitätsfehler | 2 | Chassis |
| C120601 | Electronic Parking Brake (EPB) switch signal error | 1 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C120606 | Electronic Parking Brake (EPB) switch error | 1 | Chassis |
| C120691 | The radar sensor is blocked by dirt or a foreign object. The parameter is outside the permissible range. | 1 | Chassis |
| C120697 | The radar sensor is blocked by dirt or a foreign object. The system function is restricted. | 1 | Chassis |
| C120700 | VAC-Sensor Gradientenfehler | 2 | Chassis |
| C12072A | Electronic Parking Brake (EPB) switch stuck | 1 | Chassis |
| C120800 | WSS rear-LH invalid/no signal | 1 | Chassis |
| C120801 | Auto hold switch stuck - circuit short to battery (+) | 1 | Chassis |
| C120808 | The SCC Module sets DTC when it received abnormal Wheel Speed Sensor(Left Rear) CAN message from ESP(ESC) via CAN | 1 | Chassis |
| C1208FA | Radar sensor adjustment is erroneous. Sensor is adjusted too far to the right. | 1 | Chassis |
| C120900 | Service calibration is active. | 2 | Chassis |
| C120A00 | VAC-Sensor Plausibilitätsfehler | 1 | Chassis |
| C120A11 | In case of LED right short to ground, is set to active | 2 | Chassis |
| C120B15 | In case of LED right short to battery or open, is set to active | 2 | Chassis |
| C120C11 | In case of LED left short to ground, is set to active | 2 | Chassis |
| C120D15 | In case of LED left short to battery or open, is set to active | 2 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C120606 | Electronic Parking Brake (EPB) switch error | 1 | Chassis |
| C120691 | The radar sensor is blocked by dirt or a foreign object. The parameter is outside the permissible range. | 1 | Chassis |
| C120697 | The radar sensor is blocked by dirt or a foreign object. The system function is restricted. | 1 | Chassis |
| C120700 | VAC-Sensor Gradientenfehler | 2 | Chassis |
| C12072A | Electronic Parking Brake (EPB) switch stuck | 1 | Chassis |
| C120800 | WSS rear-LH invalid/no signal | 1 | Chassis |
| C120801 | Auto hold switch stuck - circuit short to battery (+) | 1 | Chassis |
| C120808 | The SCC Module sets DTC when it received abnormal Wheel Speed Sensor(Left Rear) CAN message from ESP(ESC) via CAN | 1 | Chassis |
| C1208FA | Radar sensor adjustment is erroneous. Sensor is adjusted too far to the right. | 1 | Chassis |
| C120900 | Service calibration is active. | 2 | Chassis |
| C120A00 | VAC-Sensor Plausibilitätsfehler | 1 | Chassis |
| C120A11 | In case of LED right short to ground, is set to active | 2 | Chassis |
| C120B15 | In case of LED right short to battery or open, is set to active | 2 | Chassis |
| C120C11 | In case of LED left short to ground, is set to active | 2 | Chassis |
| C120D15 | In case of LED left short to battery or open, is set to active | 2 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 1
Vehicle data covers only some brands. These matches come from scanner data, not from a full vehicle index, so treat them as approximate.
| Brand | Model / variant | Details |
|---|---|---|
| Toyota | Communication between ECM and system power control module (C120) lost | code U0120 |
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.