Results for “P”
Fault codes 32,087
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P060791 | The control unit has a malfunction. The parameter is outside the permissible range. | 1 | Powertrain |
| P060792 | Incorrect Torque during execution 3PS (SS1) is detected by L2 | 1 | Powertrain |
| P060794 | The control unit has a malfunction. Unexpected Operation | 1 | Powertrain |
| P060796 | Control Module Performance - Component Internal Failure for unintended ECU reset | 1 | Powertrain |
| P060798 | Control Module Performance-Component or System Over Temperature | 1 | Powertrain |
| P0607DA | The control unit has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Powertrain |
| P0607DF | The control unit has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Powertrain |
| P0607E1 | Vpre was externally feed. Possible internal shortcircuit. | 1 | Powertrain |
| P0607E2 | The control unit has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Powertrain |
| P0607E3 | The control unit has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P0607E4 | The control unit has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Powertrain |
| P0607E6 | The valve relay cannot be switched off via the SPI command of the system IC | 1 | Powertrain |
| P0607E8 | Software-Reset 0 in SG, Eintrag in Fehlerspreicher | 2 | Powertrain |
| P0607EF | Datenfehler | 1 | Powertrain |
| P0607F3 | Software or Hardware fault: DTC_RbfslEcuEnContinuousError | 1 | Powertrain |
| P0607F4 | Software or Hardware fault: DTC_Watchdog of system asic does not react on wrong trigger pattern. | 1 | Powertrain |
| P0607F5 | Software or Hardware fault: DTC_RbWdhAsicWdErrorCntLimit | 1 | Powertrain |
| P0607F6 | Software or Hardware fault: DTC_RbWdhAsicWdCmdMissing | 1 | Powertrain |
| P0607F7 | ! Task Monitor reports faulty status: FW_RbWdhTaskMonConCnt | 1 | Powertrain |
| P0607F8 | ! Dual Core SW-Bist comparison fault: FW_RbWdhSwBistConCnt | 1 | Powertrain |
| P0607F9 | Software or Hardware fault: FW_RbmicSpiTransferError | 1 | Powertrain |
| P0607FA | Internal Signal | 1 | Powertrain |
| P0607FB | The control unit has a malfunction. | 1 | Powertrain |
| P0607FC | The control unit has a malfunction. | 1 | Powertrain |
| P0607FD | The control unit has a malfunction. | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P0607E4 | The control unit has a malfunction. Counter byte when corresponding SAE Code is used more than one time | 1 | Powertrain |
| P0607E6 | The valve relay cannot be switched off via the SPI command of the system IC | 1 | Powertrain |
| P0607E8 | Software-Reset 0 in SG, Eintrag in Fehlerspreicher | 2 | Powertrain |
| P0607EF | Datenfehler | 1 | Powertrain |
| P0607F3 | Software or Hardware fault: DTC_RbfslEcuEnContinuousError | 1 | Powertrain |
| P0607F4 | Software or Hardware fault: DTC_Watchdog of system asic does not react on wrong trigger pattern. | 1 | Powertrain |
| P0607F5 | Software or Hardware fault: DTC_RbWdhAsicWdErrorCntLimit | 1 | Powertrain |
| P0607F6 | Software or Hardware fault: DTC_RbWdhAsicWdCmdMissing | 1 | Powertrain |
| P0607F7 | ! Task Monitor reports faulty status: FW_RbWdhTaskMonConCnt | 1 | Powertrain |
| P0607F8 | ! Dual Core SW-Bist comparison fault: FW_RbWdhSwBistConCnt | 1 | Powertrain |
| P0607F9 | Software or Hardware fault: FW_RbmicSpiTransferError | 1 | Powertrain |
| P0607FA | Internal Signal | 1 | Powertrain |
| P0607FB | The control unit has a malfunction. | 1 | Powertrain |
| P0607FC | The control unit has a malfunction. | 1 | Powertrain |
| P0607FD | The control unit has a malfunction. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.