Results for “U1DD”
Fault codes 234
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| U1DD159 | Range of development fault memory | 1 | Network |
| U1DD160 | Range of development fault memory | 1 | Network |
| U1DD185 | Cicruit Breaker Control Error - ADuC CB Off | 1 | Network |
| U1DD186 | Circuit Breaker Damaged - Stuck Open Warning | 1 | Network |
| U1DD187 | Circuit Breaker Damaged - Stuck Close | 1 | Network |
| U1DD188 | CCB is aged | 1 | Network |
| U1DD198 | Range of development fault memory The component or the system has overtemperature. | 1 | Network |
| U1DD199 | Range of development fault memory | 1 | Network |
| U1DD201 | Range of development fault memory There is a general electrical fault. | 1 | Network |
| U1DD202 | Range of development fault memory There is a general signal fault. | 1 | Network |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| U1DD210 | Range of development fault memory | 1 | Network |
| U1DD211 | Range of development fault memory There is a short circuit to ground. | 1 | Network |
| U1DD212 | Range of development fault memory There is a short circuit to positive. | 1 | Network |
| U1DD213 | energy request from the vehicle is not processed for S1 closure, but is converted to DCDCOnly mode request due to Low SOC condition | 1 | Network |
| U1DD214 | CAN wakeup is disabled due to minimum cell voltage | 1 | Network |
| U1DD225 | Range of development fault memory There is a faulty signal waveform. | 1 | Network |
| U1DD226 | Range of development fault memory The signal change rate is below the permissible limit value. | 1 | Network |
| U1DD228 | T30 and T31 temperature differ over 10C | 1 | Network |
| U1DD229 | Range of development fault memory There is an invalid signal. | 1 | Network |
| U1DD230 | Range of development fault memory | 1 | Network |
| U1DD231 | Range of development fault memory The signal is not present. | 1 | Network |
| U1DD232 | Range of development fault memory The off-time of the signal frequency is too short. | 1 | Network |
| U1DD233 | Range of development fault memory The off-time of the signal frequency is too long. | 1 | Network |
| U1DD234 | No description available | 1 | Network |
| U1DD235 | Balancing started for no reason | 1 | Network |
| Code | Description | Brands | System |
|---|---|---|---|
| U1DD210 | Range of development fault memory | 1 | Network |
| U1DD211 | Range of development fault memory There is a short circuit to ground. | 1 | Network |
| U1DD212 | Range of development fault memory There is a short circuit to positive. | 1 | Network |
| U1DD213 | energy request from the vehicle is not processed for S1 closure, but is converted to DCDCOnly mode request due to Low SOC condition | 1 | Network |
| U1DD214 | CAN wakeup is disabled due to minimum cell voltage | 1 | Network |
| U1DD225 | Range of development fault memory There is a faulty signal waveform. | 1 | Network |
| U1DD226 | Range of development fault memory The signal change rate is below the permissible limit value. | 1 | Network |
| U1DD228 | T30 and T31 temperature differ over 10C | 1 | Network |
| U1DD229 | Range of development fault memory There is an invalid signal. | 1 | Network |
| U1DD230 | Range of development fault memory | 1 | Network |
| U1DD231 | Range of development fault memory The signal is not present. | 1 | Network |
| U1DD232 | Range of development fault memory The off-time of the signal frequency is too short. | 1 | Network |
| U1DD233 | Range of development fault memory The off-time of the signal frequency is too long. | 1 | Network |
| U1DD234 | No description available | 1 | Network |
| U1DD235 | Balancing started for no reason | 1 | Network |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.