Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C206629 | CAN: wheel speed sensor pulse signal error | 1 | Chassis |
| C206700 | CAN communication: driving information not received | 1 | Chassis |
| C207100 | Poor position recognition in front/rear of vehicle | 1 | Chassis |
| C207200 | To many invalid Ax2 values have been received during calibration sequence | 2 | Chassis |
| C207300 | Unauthenticated wheel module signal detection | 1 | Chassis |
| C207400 | EEPROM handler has detected an EEprom access error while reading or writing (e.g. Checksum, Finalbyte) for second DRS. | 2 | Chassis |
| C207500 | SensorInformation data of second Sensor Cluster not received completely. | 1 | Chassis |
| C207600 | Serial Nbr. rcvd. via CAN does not match Serial-No. in EEPROM, assuming a changes sensor cluster 2 is detected. | 1 | Chassis |
| C207800 | Ay2 signal has an INIT status failure | 1 | Chassis |
| C207900 | Ay2 signal value contains Invalid Value pattern | 1 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C207A00 | Ay2 signal is faulty (permanent). | 1 | Chassis |
| C208100 | TPMS software incompatible | 1 | Chassis |
| C208200 | Transmitter IDs not programmed | 1 | Chassis |
| C208300 | Sensor cluster 2 (body dynamic signals) has sent overvoltage fault. | 2 | Chassis |
| C208400 | Sensor cluster 2 (body dynamic signals) has detected CRC-failure in request message | 1 | Chassis |
| C208500 | Sensor cluster 2 (body dynamic signals) has sent undervoltage fault. | 1 | Chassis |
| C208600 | Sensor cluster 2 (body dynamic signals) has detected a Synchronisation failure. | 1 | Chassis |
| C208700 | Sensor cluster 2 has detected a request message(i.e ID0) rate > 25ms. | 1 | Chassis |
| C209100 | BCM internal error (TPMS control area) | 1 | Chassis |
| C209200 | Local battery voltage too high | 1 | Chassis |
| C209201 | Over voltage(B+) | 1 | Chassis |
| C209300 | Local battery voltage too low | 1 | Chassis |
| C209301 | Under voltage(B+) | 1 | Chassis |
| C209400 | Outside temperature signal missing | 1 | Chassis |
| C209500 | CAN speed signal missing | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C207A00 | Ay2 signal is faulty (permanent). | 1 | Chassis |
| C208100 | TPMS software incompatible | 1 | Chassis |
| C208200 | Transmitter IDs not programmed | 1 | Chassis |
| C208300 | Sensor cluster 2 (body dynamic signals) has sent overvoltage fault. | 2 | Chassis |
| C208400 | Sensor cluster 2 (body dynamic signals) has detected CRC-failure in request message | 1 | Chassis |
| C208500 | Sensor cluster 2 (body dynamic signals) has sent undervoltage fault. | 1 | Chassis |
| C208600 | Sensor cluster 2 (body dynamic signals) has detected a Synchronisation failure. | 1 | Chassis |
| C208700 | Sensor cluster 2 has detected a request message(i.e ID0) rate > 25ms. | 1 | Chassis |
| C209100 | BCM internal error (TPMS control area) | 1 | Chassis |
| C209200 | Local battery voltage too high | 1 | Chassis |
| C209201 | Over voltage(B+) | 1 | Chassis |
| C209300 | Local battery voltage too low | 1 | Chassis |
| C209301 | Under voltage(B+) | 1 | Chassis |
| C209400 | Outside temperature signal missing | 1 | Chassis |
| C209500 | CAN speed signal missing | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.