Fault code lookup

Results for “U”

Fault codes 7,936

Results match keywords in the stored descriptions. Codes you typed are shown first.

CodeDescriptionBrandsSystem
U1DD152Range of development fault memory The component has not been put into operation.1Network
U1DD153Range of development fault memory The component is deactivated.1Network
U1DD154Range of development fault memory Calibration is missing.1Network
U1DD155Range of development fault memory The component is not configured.1Network
U1DD156Range of development fault memory An incorrect or incompatible configuration was detected.1Network
U1DD157Range of development fault memory Incorrect or incompatible software modules were detected.1Network
U1DD158Range of development fault memory1Network
U1DD159Range of development fault memory1Network
U1DD160Range of development fault memory1Network
U1DD185Cicruit Breaker Control Error - ADuC CB Off1Network
Show 15 more matches on this page
CodeDescriptionBrandsSystem
U1DD186Circuit Breaker Damaged - Stuck Open Warning1Network
U1DD187Circuit Breaker Damaged - Stuck Close1Network
U1DD188CCB is aged1Network
U1DD198Range of development fault memory The component or the system has overtemperature.1Network
U1DD199Range of development fault memory1Network
U1DD201Range of development fault memory There is a general electrical fault.1Network
U1DD202Range of development fault memory There is a general signal fault.1Network
U1DD210Range of development fault memory1Network
U1DD211Range of development fault memory There is a short circuit to ground.1Network
U1DD212Range of development fault memory There is a short circuit to positive.1Network
U1DD213energy request from the vehicle is not processed for S1 closure, but is converted to DCDCOnly mode request due to Low SOC condition1Network
U1DD214CAN wakeup is disabled due to minimum cell voltage1Network
U1DD225Range of development fault memory There is a faulty signal waveform.1Network
U1DD226Range of development fault memory The signal change rate is below the permissible limit value.1Network
U1DD228T30 and T31 temperature differ over 10C1Network
CodeDescriptionBrandsSystem
U1DD186Circuit Breaker Damaged - Stuck Open Warning1Network
U1DD187Circuit Breaker Damaged - Stuck Close1Network
U1DD188CCB is aged1Network
U1DD198Range of development fault memory The component or the system has overtemperature.1Network
U1DD199Range of development fault memory1Network
U1DD201Range of development fault memory There is a general electrical fault.1Network
U1DD202Range of development fault memory There is a general signal fault.1Network
U1DD210Range of development fault memory1Network
U1DD211Range of development fault memory There is a short circuit to ground.1Network
U1DD212Range of development fault memory There is a short circuit to positive.1Network
U1DD213energy request from the vehicle is not processed for S1 closure, but is converted to DCDCOnly mode request due to Low SOC condition1Network
U1DD214CAN wakeup is disabled due to minimum cell voltage1Network
U1DD225Range of development fault memory There is a faulty signal waveform.1Network
U1DD226Range of development fault memory The signal change rate is below the permissible limit value.1Network
U1DD228T30 and T31 temperature differ over 10C1Network
Advanced: scanner vehicle and live-data matches

Vehicles 0

No matching vehicles.

Live data 0

No matching live-data parameters.

These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.

OpenDTC - independent fault code reference