Results for “C”
Fault codes 9,949
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| C013400 | ADC Selftest, Pressure Sensor Front Left | 1 | Chassis |
| C014100 | TCS solenoid circuit error(ASV1-rear wheel drive) | 1 | Chassis |
| C014300 | Pressure Sensor Front Right, Line Error | 1 | Chassis |
| C014400 | ADC Selftest, Pressure Sensor Front Right | 1 | Chassis |
| C014600 | TCS solenoid circuit error(USV1-rear wheel drive) | 1 | Chassis |
| C015000 | Pressure Sensor Master Cylinder 1, Line Error | 1 | Chassis |
| C015100 | offset error pressure sensor master cylinder 1 | 2 | Chassis |
| C015200 | testpulse pressure sensor master cylinder 1 | 1 | Chassis |
| C015300 | Spi-Handler Hardware Fault detection | 1 | Chassis |
| C015600 | TCS solenoid #2 circuit error(USV2) | 1 | Chassis |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| C016000 | Pressure Sensor Rear Left, Line Error | 1 | Chassis |
| C016100 | offset failure pressure sensor rear left | 2 | Chassis |
| C016200 | MRG test status not correct | 1 | Chassis |
| C016300 | HyFF reset test status not correct | 1 | Chassis |
| C016400 | ADC Selftest, Pressure Sensor Rear Left | 1 | Chassis |
| C018100 | Temporary system degradation due to multiple WSS fault. | 1 | Chassis |
| C018500 | Reverse current at wheel speed sensor supply detected and the reverse protection switch is switched off | 1 | Chassis |
| C019500 | Motor relay short circuit detected | 1 | Chassis |
| C019600 | Motor relay overload detected | 1 | Chassis |
| C01A000 | No description available | 1 | Chassis |
| C01A100 | No description available | 1 | Chassis |
| C01A800 | EEPROM content is not valid or no data can be read | 1 | Chassis |
| C01A900 | UBMR supply line interruption (defect fuse, broken car wire harness or very deep undervoltage) | 1 | Chassis |
| C01AA00 | During RFP actuation UBMR voltage dropped below 40% of VZP | 1 | Chassis |
| C01AB00 | Calibration of Rfp SDMs not possible due to undervoltage | 1 | Chassis |
| Code | Description | Brands | System |
|---|---|---|---|
| C016000 | Pressure Sensor Rear Left, Line Error | 1 | Chassis |
| C016100 | offset failure pressure sensor rear left | 2 | Chassis |
| C016200 | MRG test status not correct | 1 | Chassis |
| C016300 | HyFF reset test status not correct | 1 | Chassis |
| C016400 | ADC Selftest, Pressure Sensor Rear Left | 1 | Chassis |
| C018100 | Temporary system degradation due to multiple WSS fault. | 1 | Chassis |
| C018500 | Reverse current at wheel speed sensor supply detected and the reverse protection switch is switched off | 1 | Chassis |
| C019500 | Motor relay short circuit detected | 1 | Chassis |
| C019600 | Motor relay overload detected | 1 | Chassis |
| C01A000 | No description available | 1 | Chassis |
| C01A100 | No description available | 1 | Chassis |
| C01A800 | EEPROM content is not valid or no data can be read | 1 | Chassis |
| C01A900 | UBMR supply line interruption (defect fuse, broken car wire harness or very deep undervoltage) | 1 | Chassis |
| C01AA00 | During RFP actuation UBMR voltage dropped below 40% of VZP | 1 | Chassis |
| C01AB00 | Calibration of Rfp SDMs not possible due to undervoltage | 1 | Chassis |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.