Results for “P”
Fault codes 32,087
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| P293466 | Hybrid/EV Battery Positive Contactor 'B' Performance The signal has too many transitions or events. | 1 | Powertrain |
| P297C19 | The phase V current sensor of the vehicle's integrated charger is malfunctioning. The limit value for current has been exceeded. | 1 | Powertrain |
| P298E17 | Battery Charger 'A' Output Voltage Too High The limit value for electrical voltage has been exceeded. | 1 | Powertrain |
| P298F00 | The output voltage of the on-board DC current charge-connection unit is too high. | 1 | Powertrain |
| P29FF00 | Hybrid/EV Battery 'A' Thermal Runaway Detected. | 1 | Powertrain |
| P2A0000 | If this test was not started manually, it was activated via a redirection from 'Component test: Lambda probe' because the DTC is set, i.e. the lambda probe, front, cannot reach a rich lambda value | 1 | Powertrain |
| P2A0384 | No description available | 1 | Powertrain |
| P2AA8F1 | No description available | 1 | Powertrain |
| P2AB14B | EhcDiagErrIntFlt: There is a fault due to overtemperature. Catalyst Heater Control Module Performance | 2 | Powertrain |
| P2AB2FA | EhcDiagErrSplyVoltFlt: Supply voltage-failure EHCU | 2 | Powertrain |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| P2B2100 | The coolant temperature sensor 2 of the power electronics has a malfunction. | 1 | Powertrain |
| P2B212F | The coolant temperature sensor 2 of the power electronics has a malfunction. Signal erratic. | 1 | Powertrain |
| P2B2A7A | The rpm of the coolant pump of the power electronics is too high. Leakage or a defective seal was detected. | 1 | Powertrain |
| P2B3100 | No description available | 1 | Powertrain |
| P2B3313 | The output for solenoid 2 'Intake' (cylinder bank 1) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3400 | The output for solenoid 2 'Intake' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| P2B3411 | The output for solenoid 2 'Intake' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. There is a short circuit to ground. | 1 | Powertrain |
| P2B3613 | The output for solenoid 2 'Intake' (cylinder bank 2) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3700 | The output for solenoid 2 'Intake' (cylinder bank 2) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| P2B3711 | The output for solenoid 2 'Intake' (cylinder bank 2) for CAMTRONIC has a short circuit to ground. There is a short circuit to ground. | 1 | Powertrain |
| P2B3913 | The output for solenoid 2 'Exhaust' (cylinder bank 1) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3A00 | The output for solenoid 2 'Exhaust' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| P2B3A11 | The output for solenoid 2 'Exhaust' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. There is a short circuit to ground. | 1 | Powertrain |
| P2B3C13 | The output for solenoid 2 'Exhaust' (cylinder bank 2) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3D00 | The output for solenoid 2 'Exhaust' (cylinder bank 2) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| Code | Description | Brands | System |
|---|---|---|---|
| P2B2100 | The coolant temperature sensor 2 of the power electronics has a malfunction. | 1 | Powertrain |
| P2B212F | The coolant temperature sensor 2 of the power electronics has a malfunction. Signal erratic. | 1 | Powertrain |
| P2B2A7A | The rpm of the coolant pump of the power electronics is too high. Leakage or a defective seal was detected. | 1 | Powertrain |
| P2B3100 | No description available | 1 | Powertrain |
| P2B3313 | The output for solenoid 2 'Intake' (cylinder bank 1) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3400 | The output for solenoid 2 'Intake' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| P2B3411 | The output for solenoid 2 'Intake' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. There is a short circuit to ground. | 1 | Powertrain |
| P2B3613 | The output for solenoid 2 'Intake' (cylinder bank 2) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3700 | The output for solenoid 2 'Intake' (cylinder bank 2) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| P2B3711 | The output for solenoid 2 'Intake' (cylinder bank 2) for CAMTRONIC has a short circuit to ground. There is a short circuit to ground. | 1 | Powertrain |
| P2B3913 | The output for solenoid 2 'Exhaust' (cylinder bank 1) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3A00 | The output for solenoid 2 'Exhaust' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
| P2B3A11 | The output for solenoid 2 'Exhaust' (cylinder bank 1) for CAMTRONIC has a short circuit to ground. There is a short circuit to ground. | 1 | Powertrain |
| P2B3C13 | The output for solenoid 2 'Exhaust' (cylinder bank 2) for CAMTRONIC has an electrical fault or open circuit. There is an open circuit. | 1 | Powertrain |
| P2B3D00 | The output for solenoid 2 'Exhaust' (cylinder bank 2) for CAMTRONIC has a short circuit to ground. | 1 | Powertrain |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.