Results for “U030”
Fault codes 124
Results match keywords in the stored descriptions. Codes you typed are shown first.
| Code | Description | Brands | System |
|---|---|---|---|
| U030041 | An internal fault has occurred in the control unit software. General Checksum Failure | 1 | Network |
| U030042 | An internal fault has occurred in the control unit software. There is a general memory error. | 1 | Network |
| U030043 | An internal fault has occurred in the control unit software. There is an error in the additional memory. | 1 | Network |
| U030046 | An internal fault has occurred in the control unit software. Calibration / Parameter Memory Failure | 1 | Network |
| U030047 | Error in task monitoring | 2 | Network |
| U030048 | software error in buffer management | 1 | Network |
| U030052 | Array output indicating Inverter Temperature Sensor Noisy fault symptom status for each of the available inverter temperature sensors. | 1 | Network |
| U030053 | Array output indicating Inverter Temperature Sensor Stuck in Range fault symptom status for each of the available inverter temperature sensors. | 1 | Network |
| U030054 | An internal fault has occurred in the control unit software. Missing Calibration | 1 | Network |
| U030055 | Array output indicating Inverter Temperature Sensor Circuit Short to Battery fault symptom status for each of the available inverter temperature sensors. | 2 | Network |
Show 15 more matches on this page
| Code | Description | Brands | System |
|---|---|---|---|
| U030056 | An internal fault has occurred in the control unit software. Invalid / Incompatible Configuration | 1 | Network |
| U030057 | An internal fault has occurred in the control unit software. Invalid / Incompatible Software Component. | 1 | Network |
| U030061 | ADC test command feedback voltage - Too Low | 1 | Network |
| U030062 | ADC test command feedback voltage - Too High | 1 | Network |
| U030064 | An internal fault has occurred in the control unit software. Signal Plausibility Failure. | 1 | Network |
| U030068 | The DC Current sensor short to ground fault | 1 | Network |
| U030071 | The DC Current sensor out of range low fault. | 1 | Network |
| U030072 | The DC Current sensor offset out of range fault | 1 | Network |
| U030073 | 15V HV Voltage - Too Low | 1 | Network |
| U030074 | 15V LV Voltage - Too High | 1 | Network |
| U030092 | An internal fault has occurred in the control unit software. Performance or Incorrect Operation | 1 | Network |
| U030093 | Pump1 Motor Bridge Sensot Temp -Too high | 1 | Network |
| U030094 | Pump2 Motor Bridge Sensor Temp -Too high | 1 | Network |
| U030097 | An internal fault has occurred in the control unit software. Component or System Operation Obstructed or Blocked. | 1 | Network |
| U03009A | An internal fault has occurred in the control unit software. Component or System Operating Conditions. | 1 | Network |
| Code | Description | Brands | System |
|---|---|---|---|
| U030056 | An internal fault has occurred in the control unit software. Invalid / Incompatible Configuration | 1 | Network |
| U030057 | An internal fault has occurred in the control unit software. Invalid / Incompatible Software Component. | 1 | Network |
| U030061 | ADC test command feedback voltage - Too Low | 1 | Network |
| U030062 | ADC test command feedback voltage - Too High | 1 | Network |
| U030064 | An internal fault has occurred in the control unit software. Signal Plausibility Failure. | 1 | Network |
| U030068 | The DC Current sensor short to ground fault | 1 | Network |
| U030071 | The DC Current sensor out of range low fault. | 1 | Network |
| U030072 | The DC Current sensor offset out of range fault | 1 | Network |
| U030073 | 15V HV Voltage - Too Low | 1 | Network |
| U030074 | 15V LV Voltage - Too High | 1 | Network |
| U030092 | An internal fault has occurred in the control unit software. Performance or Incorrect Operation | 1 | Network |
| U030093 | Pump1 Motor Bridge Sensot Temp -Too high | 1 | Network |
| U030094 | Pump2 Motor Bridge Sensor Temp -Too high | 1 | Network |
| U030097 | An internal fault has occurred in the control unit software. Component or System Operation Obstructed or Blocked. | 1 | Network |
| U03009A | An internal fault has occurred in the control unit software. Component or System Operating Conditions. | 1 | Network |
Advanced: scanner vehicle and live-data matches
Vehicles 0
No matching vehicles.
Live data 0
No matching live-data parameters.
These tables come from diagnostic data. They are useful for advanced users and can be ignored for a normal code lookup.