Fault code lookup

NetworkU3023

Serious

Severity: Serious - have it checked soon

Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation

9 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 9

BrandCodeDescriptionSystem
Ashok Leyland CVU3023SCD PROTOCOL VERSION BrandNetwork
DaewooU3023Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation SAENetwork
EOBDU3023Krmilni modul vhodno napajalno vezje A - korelacija vklop/vžig/start vezja BrandNetwork
GMU3023Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation SAENetwork
HoldenU3023Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation SAENetwork
HondaU3023OBC IG Signal Failure BrandNetwork
OpelU3023Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation SAENetwork
PeugeotU3023Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation SAENetwork
SaabU3023Control Module Input Power Circuit A - Ignition Input On/Start Circuit Correlation SAENetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U302xx codes.

OpenDTC - independent fault code reference