Fault code lookup

NetworkU1419

Serious

Severity: Serious - have it checked soon

Dynamic Range Error

11 brands affected · Description from BYD data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 11

BrandCodeDescriptionSystem
Mercedes-BenzU1419No description available Network
BYDU1419Dynamic Range Error BrandNetwork
CheryU1419Dynamic Range Error BrandNetwork
DFFXU1419Dynamic Range Error BrandNetwork
EOBDU1419LIN ryšio gedimas BrandNetwork
GeelyU1419Dynamic Range Error BrandNetwork
Great WallU1419Dynamic Range Error BrandNetwork
HafeiU1419Dynamic Range Error BrandNetwork
MitsubishiU1419Dynamic range error BrandNetwork
ProtonU1419Dynamic range error BrandNetwork
SuzukiU1419Invalid Data Received From Stereo Camera - Checksum Error BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U1419 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU141986Das Signal TGC_UDA_Dtct_ST3 oder TGC_UDA_Obj_1_Conf_ST3 oder TGC_UDA_Obj_2_Conf_ST3 oder TGC_UDA_ObjDtctFnct_Stat_ST3 wird mit einem ungültigem Wert empfangen BrandNetwork

6Related codes

Browse Uxxx codes or U141xx codes.

OpenDTC - independent fault code reference