NetworkU1402
SeriousSeverity: Serious - have it checked soon
Immobilizer message error
Key terms: Control module: a small computer that runs one part of the car
1What it means in plain English
Control modules in the car cannot communicate with each other over the vehicle network.
2Common causes
- Wiring or connector fault on the communication bus
- Faulty control module
- Low battery voltage or poor ground
- Water ingress in a connector or module
- Aftermarket device interfering with the bus
3Can I drive?
The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.
This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.
4Brand data 21
| Brand | Code | Description | System |
|---|---|---|---|
| BAIC Motor | U1402 | Immobilizer message error Brand | Network |
| Mercedes-Benz | U1402 | No description available | Network |
| BYD | U1402 | Dynamic Range Error Brand | Network |
| Chery | U1402 | Dynamic Range Error Brand | Network |
| Chrysler | U1402 | implausible engine temperature signal received Brand | Network |
| DFFX | U1402 | Dynamic Range Error Brand | Network |
| DFXK | U1402 | Immobilizer information error Brand | Network |
| EOBD | U1402 | Koneksi konsumen aktif Brand | Network |
| Geely | U1402 | Dynamic Range Error Brand | Network |
| Great Wall | U1402 | Dynamic Range Error Brand | Network |
| Hafei | U1402 | Dynamic Range Error Brand | Network |
| Honda | U1402 | No description available | Network |
| Isuzu | U1402 | No description available | Network |
| Mahindra | U1402 | No description available | Network |
| Mitsubishi | U1402 | Dynamic range error Brand | Network |
| Proton | U1402 | Dynamic range error Brand | Network |
| MG (SAIC) | U1402 | Torque Control Error Brand | Network |
| Smart | U1402 | No description available | Network |
| Sprinter | U1402 | No description available | Network |
| Subaru | U1402 | No description available | Network |
| Suzuki | U1402 | Invalid Data Received From ECM/PCM “A” – Checksum Error Brand | Network |
Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.
5Extended variant codes 1
These 7-character codes are manufacturer-specific variants of U1402 and may be reported by some scan tools.
| Brand | Code | Description | System |
|---|---|---|---|
| SsangYong | U140200 | CAN: error in engine coolant temperature(from MS) signal value (invalid) Brand | Network |
6Related codes
Browse Uxxx codes or U140xx codes.