Fault code lookup

NetworkU103F

Serious

Severity: Serious - have it checked soon

Left Headlamp Leveling Module LIN Communication Failure

2 brands affected · Description from Maserati data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 2

BrandCodeDescriptionSystem
Mercedes-BenzU103FNo description available Network
MaseratiU103FLeft Headlamp Leveling Module LIN Communication Failure BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 15

These 7-character codes are manufacturer-specific variants of U103F and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU103F00Ethernet communication has a malfunction. DEM_BOSCH_EthernetComm_MALFUNCTION BrandNetwork
Mercedes-BenzU103F01Ethernet communication has a malfunction. Debug data for DEM_BOSCH_EthernetComm_MALFUNCTION BrandNetwork
Mercedes-BenzU103F13Ethernet communication has a malfunction. There is an open circuit. BrandNetwork
Mercedes-BenzU103F2BEthernet communication has a malfunction. The electrical lines have a short circuit to each other. BrandNetwork
Mercedes-BenzU103F56Ethernet communication has a malfunction. ETH switch configuration error BrandNetwork
Mercedes-BenzU103F85Ethernet communication has a malfunction. There is a signal above the permissible limit value. BrandNetwork
Mercedes-BenzU103F88Ethernet communication has a malfunction. Bus OFF BrandNetwork
Mercedes-BenzU103F95Ethernet communication has a malfunction. The mechanical setup is not OK. BrandNetwork
Mercedes-BenzU103F96Ethernet communication has a malfunction. Component Internal Failure BrandNetwork
Mercedes-BenzU103F9AEthernet communication has a malfunction. Component or System Operating Conditions BrandNetwork
Mercedes-BenzU103FE0Ethernet communication has a malfunction. DEM_BOSCH_ETH_LEO_P5_LINK_ERR BrandNetwork
Mercedes-BenzU103FE1Ethernet communication has a malfunction. DEM_BOSCH_ETH_LEO_P3_LINK_ERR BrandNetwork
Mercedes-BenzU103FE2Ethernet communication has a malfunction. DEM_BOSCH_ETH_LEO_P2_LINK_ERR BrandNetwork
Mercedes-BenzU103FE6uC Ethernet Controller failed to respond Configuration Command BrandNetwork
Mercedes-BenzU103FE7Errors related to TcpIp-Wrapper 2 Bytes - App Id 2 Bytes - Error Code BrandNetwork

6Related codes

Browse Uxxx codes or U103xx codes.

OpenDTC - independent fault code reference