Fault code lookup

NetworkU046B

Serious

Severity: Serious - have it checked soon

Invalid data received from global positioning system module

21 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 21

BrandCodeDescriptionSystem
Ashok Leyland CVU046BNo description available Network
BAIC MotorU046BInvalid Data Received From Global Positioning System Module BrandNetwork
BYDU046BInvalid Data Received From Global Positioning System Module BrandNetwork
CheryU046BInvalid Data Received From Global Positioning System Module BrandNetwork
DaewooU046BNo description available Network
DFFSU046BInvalid Data Received From Global Positioning System Module BrandNetwork
DFFXU046BInvalid Data Received From Global Positioning System Module BrandNetwork
DFXKU046BInvalid Data Received From Global Positioning System Module BrandNetwork
EOBDU046BOgiltig data mottagen från GPS-modul BrandNetwork
GeelyU046BInvalid Data Received From Global Positioning System Module BrandNetwork
GMU046BInvalid Data Received From Global Positioning System Module BrandNetwork
Great WallU046BInvalid Data Received From Global Positioning System Module BrandNetwork
HafeiU046BInvalid Data Received From Global Positioning System Module BrandNetwork
HoldenU046BInvalid Data Received From Global Positioning System Module BrandNetwork
HyundaiU046BNo description available Network
Land RoverU046BInvalid Data Received From Global Positioning System Module BrandNetwork
OpelU046BInvalid Data Received From Global Positioning System Module BrandNetwork
PeugeotU046BNo description available Network
SaabU046BInvalid Data Received From Global Positioning System Module BrandNetwork
MG (SAIC)U046BInvalid Data Received From Global Positioning System Module BrandNetwork
ToyotaU046BInvalid data received from global positioning system module BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 5

These 7-character codes are manufacturer-specific variants of U046B and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU046B29Botschaften vom POS-Steuergerät werden mit ungültigem Wert oder mit Fehler gesendet BrandNetwork
Mercedes-BenzU046B41Botschaften vom POS-Steuergerät zeigen einen Fehler im Botschaftszähler oder CRC-Fehler BrandNetwork
Mercedes-BenzU046B8FDie Signale vom POS-Steuergerät werden mit zu altem Zeitstempel empfangen. BrandNetwork
Mercedes-BenzU046BE0Signal DAP_GNSS_TmSync_Stat_ST3 signalizes NO_INIT_SYNC or LOST_SYNC BrandNetwork
Mercedes-BenzU046BE1Das Signal INP_IS2_IMU_Stat vom POS_SG wird mit einem ungültigem Wert empfangen BrandNetwork

6Related codes

Browse Uxxx codes or U046xx codes.

OpenDTC - independent fault code reference