Fault code lookup

NetworkU0434

Serious

Severity: Serious - have it checked soon

Invalid data received from active roll control module

20 brands affected · Description from Toyota data.

Key terms: Control module: a small computer that runs one part of the car

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 20

BrandCodeDescriptionSystem
Ashok Leyland CVU0434No description available Network
BAIC MotorU0434Invalid Data Received From Active Roll Control Module BrandNetwork
BYDU0434Invalid Data Received From Active Roll Control Module BrandNetwork
CheryU0434Invalid Data Received From Active Roll Control Module BrandNetwork
DaewooU0434Invalid Data Received From Active Roll Control Module BrandNetwork
DFFSU0434Invalid Data Received From Active Roll Control Module BrandNetwork
DFFXU0434Invalid Data Received From Active Roll Control Module BrandNetwork
DFXKU0434Invalid Data Received From Active Roll Control Module BrandNetwork
EOBDU0434Ugyldig data mottatt fra aktiv rullekontrollmodul BrandNetwork
GeelyU0434Invalid Data Received From Active Roll Control Module BrandNetwork
GMU0434Invalid Data Received From Active Roll Control Module BrandNetwork
Great WallU0434Invalid Data Received From Active Roll Control Module BrandNetwork
HafeiU0434Invalid Data Received From Active Roll Control Module BrandNetwork
HyundaiU0434No description available Network
Land RoverU0434Invalid data received from dynamic response module BrandNetwork
PeugeotU0434No description available Network
PorscheU0434No description available Network
SaabU0434Invalid Data Received From Active Roll Control Module BrandNetwork
MG (SAIC)U0434Invalid Data Received From Active Roll Control Module BrandNetwork
ToyotaU0434Invalid data received from active roll control module BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U043xx codes.

OpenDTC - independent fault code reference