Fault code lookup

NetworkU0318

Serious

Severity: Serious - have it checked soon

Software Incompatibility With Brake System Control Module A

25 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

Safety: This code relates to the braking system or brake assist. Braking may be affected.

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 25

BrandCodeDescriptionSystem
Ashok Leyland CVU0318EGR (Exhaust Gas Recirculation) System. Temperature./Engine Charge Air Cooler. Sensor/S Correlation Error BrandNetwork
BAIC MotorU0318Software Incompatibility With Brake System Control Module BrandNetwork
BYDU0318Software Incompatibility With Brake System Control Module BrandNetwork
CheryU0318Lost communication with ICM - message missing BrandNetwork
DaewooU0318Software Incompatibility With Brake System Control Module BrandNetwork
DFFSU0318Software Incompatibility With Brake System Control Module BrandNetwork
DFFXU0318Software Incompatibility With Brake System Control Module BrandNetwork
DFXKU0318Software Incompatibility With Brake System Control Module BrandNetwork
EOBDU0318Softwareinkompatibilitet med bremsestyringsmodul 'A' BrandNetwork
GeelyU0318Software Incompatibility With Brake System Control Module BrandNetwork
GMU0318Software Incompatibility With Brake System Control Module BrandNetwork
Great WallU0318Software Incompatibility With Brake System Control Module BrandNetwork
HafeiU0318Software Incompatibility With Brake System Control Module BrandNetwork
HoldenU0318Software Incompatibility With Brake System Control Module BrandNetwork
HyundaiU0318Software Incompatibility With Brake System Control Module A SAENetwork
Land RoverU0318Software Incompatibility With Brake System Control Module A SAENetwork
OpelU0318Software Incompatibility With Brake System Control Module BrandNetwork
PeugeotU0318Software Incompatibility With Brake System Control Module A SAENetwork
PorscheU0318Software Incompatibility With Brake System Control Module A SAENetwork
SaabU0318Software Incompatibility With Brake System Control Module BrandNetwork
MG (SAIC)U0318Software Incompatibility With Brake System Control Module BrandNetwork
SuzukiU0318Software Incompatibility With Brake System Control Module A SAENetwork
TataU0318Software Incompatibility With Brake System Control Module BrandNetwork
ToyotaU0318Software Incompatibility With Brake System Control Module BrandNetwork
VolkswagenU0318SAE: Software Incompatibility with Brake System Control Module BrandNetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 1

These 7-character codes are manufacturer-specific variants of U0318 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzU031855Software Incompatibility With Brake System Control Module A. The component is not configured. BrandNetwork

6Related codes

Browse Uxxx codes or U031xx codes.

OpenDTC - independent fault code reference