Fault code lookup

NetworkU0253

Serious

Severity: Serious - have it checked soon

Lost Communication With Accessory Protocol Interface Module

22 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

  1. Wiring or connector fault on the communication bus
  2. Faulty control module
  3. Low battery voltage or poor ground
  4. Water ingress in a connector or module
  5. Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 22

BrandCodeDescriptionSystem
Ashok Leyland CVU0253Lost Communication With Accessory Protocol Interface Module SAENetwork
BAIC MotorU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
BYDU0253Lost communication with A/C compressor BrandNetwork
CheryU0253Lost communication with current sensor BrandNetwork
DFFSU0253Controller 1 CAN fault BrandNetwork
DFFXU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
DFXKU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
EOBDU0253Prarastas ryšys su priedų protokolo sąsajos moduliu BrandNetwork
FordU0253Lost Communication With Accessory Protocol Interface Module SAENetwork
GeelyU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
GMU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
Great WallU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
HafeiU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
HyundaiU0253Lost Communication With Accessory Protocol Interface Module SAENetwork
IsuzuU0253Lost Communication With Accessory Protocol Interface Module SAENetwork
Land RoverU0253Lost communication with the accessory protocol interface module BrandNetwork
MazdaU0253Lost Communication With Accessory Protocol Interface Module SAENetwork
PeugeotU0253Lost Communication With Accessory Protocol Interface Module SAENetwork
SaabU0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
MG (SAIC)U0253Lost Communication With Accessory Protocol Interface Module BrandNetwork
ToyotaU0253Controller 1 CAN fault BrandNetwork
VolkswagenU0253Lost Communication With Accessory Protocol Interface Module SAENetwork

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Related codes

Browse Uxxx codes or U025xx codes.

OpenDTC - independent fault code reference