NetworkU0123

Serious

Severity: Serious - have it checked soon

Lost Communication With Yaw Rate Sensor Module

32 brands affected · Generic SAE J2012 description.

Key terms: Control module: a small computer that runs one part of the car · SAE J2012: the standard generic code list

1What it means in plain English

Control modules in the car cannot communicate with each other over the vehicle network.

2Common causes

Wiring or connector fault on the communication bus
Faulty control module
Low battery voltage or poor ground
Water ingress in a connector or module
Aftermarket device interfering with the bus

3Can I drive?

Serious · drive with care

The car may run normally or may not run at all. If the module that has lost communication controls steering, brakes, park brake, charging or engine cooling, drive only if those systems feel normal; stop safely if the steering becomes heavy, a brake warning appears, or the engine temperature climbs. If the car will not start or runs badly, have it towed.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 32

Brand	Code	Description	System
Ashok Leyland CV	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
BAIC Motor	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
BYD	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Chery	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Daewoo	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Daihatsu	U0123	Yaw rate sensor receive abnormal Brand	Network
DFFS	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
DFFX	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
DFXK	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
EOBD	U0123	Communicatieverlies met gierhoeksensormodule Brand	Network
Geely	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
GM	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Great Wall	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Hafei	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Holden	U0123	Lost Communication with Yaw Rate Sensor Module Brand	Network
Honda	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
Hyundai	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
Isuzu	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
Land Rover	U0123	Lost communication with yaw ratesensor module Brand	Network
Opel	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Perodua	U0123	Yaw rate sensor receive abnormal Brand	Network
Peugeot	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
Proton	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
Saab	U0123	Lost Communication With Yaw Rate Sensor Module Brand	Network
Maxus (SAIC)	U0123	Lost Communication With LSM Brand	Network
MG (SAIC)	U0123	Lost Communication With LSM Brand	Network
Subaru	U0123	Lost Communication With Yaw Rate Sensor Module SAE	Network
Suzuki	U0123	Lost Communication With Yaw Rate Sensor Brand	Network
SWM Motor	U0123	EMS lost communication with ESC Brand	Network
Tata	U0123	Message Time-out Error With ABS/ESP Brand	Network
Toyota	U0123	Lost communication with yaw rate sensor module Brand	Network
Volkswagen	U0123	SAE: No Communications with Yaw Rate Sensor Module Brand	Network

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 3

These 7-character codes are manufacturer-specific variants of U0123 and may be reported by some scan tools.

Brand	Code	Description	System
SsangYong	U012381	Variant coding error: Blind Spot Detection (BSD) specification detection Brand	Network
Mercedes-Benz	U012387	Die Kommunikation mit einem oder mehreren Farberzeug- und Einkoppelmodulen auf LIN-Bus 2 hat Funktionsstörung. Die Botschaft fehlt. Brand	Network
SsangYong	U012387	CAN communication: Blind Spot Detection (BSD) message not received Brand	Network

6Related codes

Browse Uxxx codes or U012xx codes.