Fault code lookup

PowertrainP110A

Caution

Severity: Caution - get it checked when you can

NO. 267 battery voltage sampling wire loop fault

16 brands affected · Description from BYD data.

Key terms: Control module: a small computer that runs one part of the car · Powertrain: engine, transmission and emissions

Safety: This code relates to the charging system. The battery may go flat and the car may stall.

1What it means in plain English

The engine or powertrain control system has stored a fault that does not have specific guidance in this database yet.

2Common causes

  1. Sensor or actuator fault
  2. Wiring or connector fault
  3. Vacuum or intake leak
  4. Fuel or ignition problem
  5. Control module fault

3Can I drive?

Caution · drive with care

The electrical system may fail and the battery may go flat, risking a stall. If the battery or charging warning light is on, drive straight to a workshop.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 16

BrandCodeDescriptionSystem
BAIC MotorP110Aair flow sensor heating output circuit open BrandPowertrain
BYDP110ANO. 267 battery voltage sampling wire loop fault BrandPowertrain
CheryP110APerformance Limitation Logic Decrease To 1 BrandPowertrain
DaewooP110ANo description available Powertrain
DFXKP110AVehicle Performance Restriction 0 Activated BrandPowertrain
EOBDP110AMAF-avvik BrandPowertrain
GMP110ANo description available Powertrain
Great WallP110AVehicle performance limiter level 0 BrandPowertrain
HoldenP110AAlternative Fuel Trim System Lean at Idle Bank 1 BrandPowertrain
IsuzuP110ANo description available Powertrain
MahindraP110ANo description available Powertrain
MitsubishiP110AC2 Capacitor TEMP.SNS. circuit HI BrandPowertrain
OpelP110ANo description available Powertrain
PeugeotP110ANo description available Powertrain
ProtonP110AC2 Capacitor TEMP.SNS. circuit HI BrandPowertrain
SaabP110ANo description available Powertrain

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 3

These 7-character codes are manufacturer-specific variants of P110A and may be reported by some scan tools.

BrandCodeDescriptionSystem
SsangYongP110A00Discharge current error detection BrandPowertrain
SsangYongP110A01Discharge current out of range BrandPowertrain
SsangYongP110A02Discharge current excessive BrandPowertrain

6Related codes

  • P1100 Mass Air Flow Sensor Intermittent
  • P1101 Mass Air Flow Sensor Out of Self-Test Range
  • P1102 Mass Air Flow Sensor In Range But Lower Than Expected
  • P1103 Mass Air Flow Sensor In Range But Higher Than Expected
  • P1104 Signal too small
  • P1105 The intake air pressure sensor signal is implausible when the engine is not running.
  • P1106 Manifold Absolute Pressure Sensor Circuit Intermittent Low Voltage
  • P1107 Manifold Absolute Pressure Sensor Circuit Intermittent High Voltage
  • P1108 Intake air pressure sensor circuit voltage high intermittently
  • P1109 The intake air pressure sensor signal is implausible when the engine is running
  • P110B NO. 268 battery voltage sampling wire loop fault
  • P110C NO. 269 battery voltage sampling wire loop fault

Browse Pxxx codes or P110xx codes.

OpenDTC - independent fault code reference