PowertrainP083000
CautionSeverity: Caution - get it checked when you can
If clutch switch signal is not detected while gear shift is detected, ECM sets DTC. This fault might be caused by open or short to power/ground in circuit of clutch switch
Key terms: Powertrain: engine, transmission and emissions
1What it means in plain English
This range normally covers the transmission control system, but some manufacturers use P07-P09 codes for unrelated functions (fuel pump control, air-mix motors, lighting or windows). Check the description before assuming it is a transmission fault.
2Common causes
- Low or dirty transmission fluid
- Faulty shift solenoid
- Faulty speed sensor
- Wiring or connector fault
- Internal transmission wear
3Can I drive?
If the transmission slips, jerks, will not shift, or a transmission temperature warning is on, stop driving and let it cool: continuing can cause expensive damage. If the code names a different system (for example the fuel pump), treat it on its own terms; a fuel-pump control failure can stall the car, so have it checked before driving further. Otherwise drive gently to a workshop.
This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.
4Brand data 2
| Brand | Code | Description | System |
|---|---|---|---|
| Hyundai | P083000 | If clutch switch signal is not detected while gear shift is detected, ECM sets DTC. This fault might be caused by open or short to power/ground in circuit of clutch switch Brand | Powertrain |
| SsangYong | P083000 | Fixed lower clutch switch signal (input status) Brand | Powertrain |
Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.
5Related codes
Browse Pxxx codes or P083xx codes.