Fault code lookup

ChassisC2200

Serious

Severity: Serious - have it checked soon

Engine oil level too low

11 brands affected · Description from Hyundai data.

Key terms: ABS: anti-lock braking, which stops the wheels locking · Stability control: helps stop the car skidding · Wheel speed sensor: measures how fast each wheel turns

Safety: This code relates to engine oil pressure or oil level. Low oil pressure can destroy the engine within minutes.

1What it means in plain English

A chassis system has a fault, usually ABS, traction control or stability control, but some makes use this range for airbags, electric power steering or park brakes.

2Common causes

  1. Faulty wheel speed sensor
  2. Damaged sensor ring or wiring
  3. Faulty ABS module
  4. Low brake fluid
  5. Wheel bearing damage

3Can I drive?

Serious · drive with care

Stop the engine as soon as it is safe and do not drive until it has been checked. Low oil pressure or a low oil level can destroy the engine within minutes.

This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.

4Brand data 11

BrandCodeDescriptionSystem
DaewooC2200No description available Chassis
GMC2200No description available Chassis
HoldenC2200No description available Chassis
HyundaiC2200Engine oil level too low BrandChassis
Land RoverC2200No description available Chassis
MaseratiC2200Anti-lock Brake Module Internal Calibration / Parameter Memory Failure BrandChassis
MitsubishiC2200ECU internal error BrandChassis
OpelC2200No description available Chassis
PeugeotC2200No description available Chassis
ProtonC2200ECU internal error BrandChassis
SaabC2200No description available Chassis

Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.

5Extended variant codes 11

These 7-character codes are manufacturer-specific variants of C2200 and may be reported by some scan tools.

BrandCodeDescriptionSystem
Mercedes-BenzC220000Control unit 'ESP(R)/regenerative braking system' has a malfunction BrandChassis
SprinterC220000No description available Chassis
SsangYongC220000EPB Assembly check not performed BrandChassis
Mercedes-BenzC220001Control unit 'ESP(R)/regenerative braking system' has a malfunction. General Electrical Failure. BrandChassis
SsangYongC220054Failure to check Electronic Parking Brake (EPB) operation after Electrical Brake Unit (EBU) replacement BrandChassis
Mercedes-BenzC2200E3Steuergerät MCU: Software ist Function check software BrandChassis
Mercedes-BenzC2200E6Boost converter Fehler BrandChassis
Mercedes-BenzC2200E7Disconnection of supply line KL30S detected BrandChassis
Mercedes-BenzC2200FAGMR Dauerregelung BrandChassis
Mercedes-BenzC2200FBnon-reparable HCU/ECU mismatch BrandChassis
Mercedes-BenzC2200FCPlattrollwarner EEPROM Daten Prfsummenfehler BrandChassis

6Related codes

  • C2201 2E0C00 2E0D00 00 01 01 000000 00 Final Drive Control Module (FDCM) ECU internal
  • C2202 If C2206, C123A, and/or are active then continue, else if any other ABS DTCs are active c...
  • C2203 Chassis No. not programmed
  • C2204 Sensor cluster internal error
  • C2205 Steering Angle Sensor Internal-Component Internal Failure
  • C2206 Vehicle configuration mismatch
  • C2208 4WD ECU internal error
  • C2209 Tire Pressure Monitor Internal
  • C220B This procedure will calibrate the inlet and pilot valves of the ABS and should be perform...
  • C220C Active Suspension Module Internal-Internal Electronic Failure
  • C220000 Control unit 'ESP(R)/regenerative braking system' has a malfunction
  • C220001 Control unit 'ESP(R)/regenerative braking system' has a malfunction. General Electrical F...

Browse Cxxx codes or C220xx codes.

OpenDTC - independent fault code reference