ChassisC0561
CautionSeverity: Caution - get it checked when you can
System Disabled Information Stored
Key terms: ABS: anti-lock braking, which stops the wheels locking · Stability control: helps stop the car skidding · Wheel speed sensor: measures how fast each wheel turns · SAE J2012: the standard generic code list
1What it means in plain English
The ABS or stability control system has disabled itself and stored a fault, so those aids are not available.
2Common causes
- Faulty wheel speed sensor
- Damaged wiring or connector
- Low brake fluid
- Faulty ABS module
- Faulty steering angle or yaw sensor
3Can I drive?
Normal braking still works, but ABS and stability control may not. Drive carefully and have the system checked soon.
This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.
4Brand data 12
| Brand | Code | Description | System |
|---|---|---|---|
| Ashok Leyland CV | C0561 | System Disabled Information Stored SAE | Chassis |
| Mercedes-Benz | C0561 | System Disabled Information Stored SAE | Chassis |
| Daewoo | C0561 | Controller replace Brand | Chassis |
| EOBD | C0561 | Vakumanduri 'A/B' vastavus Brand | Chassis |
| GM | C0561 | Circuito RAM/ROM Mód ABS Brand | Chassis |
| Holden | C0561 | System Disabled Information Stored Brand | Chassis |
| Land Rover | C0561 | System Disabled Information Stored SAE | Chassis |
| Opel | C0561 | Notice: The ABS pump motor will execute two 15 second cycles and discharge the high pressure accumulators. Do not stop the ABS pump motor procedure until the pump motor has finished. If the procedure is stopped, DTC.4B will set on the next ignition cycle Brand | Chassis |
| Peugeot | C0561 | Notice: The ABS pump motor will execute two 15 second cycles and discharge the high pressure accumulators. Do not stop the ABS pump motor procedure until the pump motor has finished. If the procedure is stopped, DTC.4B will set on the next ignition cycle Brand | Chassis |
| Saab | C0561 | Circuito RAM/ROM Mód ABS Brand | Chassis |
| Suzuki | C0561 | Notice: The ABS pump motor will run two 15s cycles and discharge the high pressure accumulators. Before the ABS pump motor procedure is completed, do not stop it. If the procedure is stopped, DTC.4B will appear on the next ignition cycle Brand | Chassis |
| Toyota | C0561 | Vacuum sensor 'A/B' correlation Brand | Chassis |
Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.
5Extended variant codes 1
These 7-character codes are manufacturer-specific variants of C0561 and may be reported by some scan tools.
| Brand | Code | Description | System |
|---|---|---|---|
| Mercedes-Benz | C0561FF | Vakuumsensor plausibilitäts Fehler Brand | Chassis |
6Related codes
Browse Cxxx codes or C056xx codes.