BodyB1E08
CautionSeverity: Caution - get it checked when you can
1F = Antenna Coil Circuit Fault
Key terms: Control module: a small computer that runs one part of the car
1What it means in plain English
A body system has a fault. Depending on the make, this range can include airbags and seat belts, windows, locks and climate control, and also charging, brake, oil or coolant sensors.
2Common causes
- Wiring or connector fault
- Faulty sensor or switch
- Water or corrosion in a connector
- Control module fault
- Low battery voltage
3Can I drive?
Do not assume this code is safe to drive. If it concerns the brakes, brake vacuum, charging/alternator, engine oil or coolant, have it diagnosed before driving. Airbags or seat belts may not work in a crash, and a brake or charging fault can leave the car unsafe or stranded. For convenience systems (windows, locks, climate), have it checked when convenient.
This page gives general information. It is not professional advice. For a definite diagnosis and a repair quote, ask a qualified mechanic to inspect the car.
4Brand data 9
| Brand | Code | Description | System |
|---|---|---|---|
| Mercedes-Benz | B1E08 | No description available | Body |
| BYD | B1E08 | Next channel switch stuck Brand | Body |
| Chrysler | B1E08 | No description available | Body |
| Daewoo | B1E08 | No description available | Body |
| Ford | B1E08 | 1F = Antenna Coil Circuit Fault Brand | Body |
| GM | B1E08 | No description available | Body |
| Holden | B1E08 | No description available | Body |
| Isuzu | B1E08 | No description available | Body |
| Mazda | B1E08 | 1F = Antenna Coil Circuit Fault Brand | Body |
Legend: SAE is the generic J2012 description; Brand is text taken from that manufacturer’s data. Manufacturer rows keep the wording and language of the source data, and non-English text is tagged so screen readers pronounce it correctly.
5Extended variant codes 5
These 7-character codes are manufacturer-specific variants of B1E08 and may be reported by some scan tools.
| Brand | Code | Description | System |
|---|---|---|---|
| Mercedes-Benz | B1E0811 | Output 10 for the LED channel has a malfunction. There is a short circuit to ground. Brand | Body |
| Mercedes-Benz | B1E084B | Output 10 for the LED channel has a malfunction. There is a fault due to overtemperature. Brand | Body |
| Mercedes-Benz | B1E0855 | Output 10 for the LED channel has a malfunction. The component is not configured. Brand | Body |
| Mercedes-Benz | B1E0884 | Output 10 for the LED channel has a malfunction. There is a signal below the permissible limit value. Brand | Body |
| Mercedes-Benz | B1E0891 | Output 10 for the LED channel has a malfunction. The parameter is outside the permissible range. Brand | Body |
6Related codes
Browse Bxxx codes or B1E0xx codes.