MG (SAIC) fault codes
7,311 codes · 85 vehicle records · 0 ECU records · 0 live-data parameters
Codes 7,311
| Code | Description | Brands | System |
|---|---|---|---|
| C1152 | CAN signal Stuck Throttle error | 17 | Chassis |
| C1156 | Seat belt switch - driver's | 11 | Chassis |
| C1157 | Front seat belt pre-tensioner - driver's side | 9 | Chassis |
| C1161 | Front seat belt pre-tensioner - pass side | 12 | Chassis |
| C1162 | Seat control module - driver's | 11 | Chassis |
| C1170 | Seat forward/rearward switch - driver's | 14 | Chassis |
| C1200 | Torque sensor power supply voltage failure | 30 | Chassis |
| C1201 | Motor circuit short to battery or ground | 30 | Chassis |
| C1202 | Current following abnormality | 29 | Chassis |
| C1203 | Current is too large | 24 | Chassis |
| C1204 | Motor current too low | 24 | Chassis |
| C1205 | Power supply voltage too high | 29 | Chassis |
| C1206 | Power supply voltage too low | 28 | Chassis |
| C1207 | Seat lumbar height switch - passenger's | 29 | Chassis |
| C1208 | Memory reading and writing error | 23 | Chassis |
| C1209 | Seat depth switch - passenger's | 20 | Chassis |
| C1210 | Fault - engine in running status | 29 | Chassis |
| C1211 | Attempt to restart assist at high speed | 29 | Chassis |
| C1212 | Vehicle speed signal not received | 26 | Chassis |
| C1213 | Seat squab adjustment switch - passenger's | 20 | Chassis |
| C1215 | C1214/ Memory switch position 1/2 - passenger's | 21 | Chassis |
| C1216 | Memory switch position 3 - passenger's | 22 | Chassis |
| C121F | If CAN signals are not entered from the door module at the passenger's seat that controls the side mirror (indicator) in the passenger's seat, BSD ECU sets DTC and turns off BSD switch LED and inhibits system operation | 11 | Chassis |
| C1222 | Seat depth motor - passenger's | 26 | Chassis |
| C1225 | Speed control relay - passenger's | 25 | Chassis |
| C1226 | Excessive RF Wheel Acceleration | 25 | Chassis |
| C1231 | Control unit internal fault | 25 | Chassis |
| C1234 | Seat forward/rearward sensor - passenger's | 19 | Chassis |
| C1236 | Vehicle speed signal invalid | 27 | Chassis |
| C123F | System Voltage Low | 7 | Chassis |
| C1241 | FL outlet valve | 26 | Chassis |
| C1242 | Pump motor circuit open | 18 | Chassis |
| C1245 | Longitudinal G sensor | 16 | Chassis |
| C1246 | Rear Right sub loudspeaker | 26 | Chassis |
| C124A | AWD Oil Pump Motor Speed Sensor Signal Circuit High Voltage | 11 | Chassis |
| C124B | AWD Oil Pump Motor Speed Sensor Signal Circuit Erratic | 8 | Chassis |
| C124C | Left Front Wheel Speed Sensor Incorrect Mounting | 8 | Chassis |
| C124D | Internal 5V Sensor Supply | 7 | Chassis |
| C124E | Left Rear Wheel Speed Sensor Incorrect Mounting | 8 | Chassis |
| C124F | Control Module Improper Shutdown | 10 | Chassis |
| C1251 | Tyre Pressure Sensor - Rear Left | 25 | Chassis |
| C1252 | Tyre Pressure Sensor - Rear Right | 16 | Chassis |
| C1253 | SAS sensor abnormal | 14 | Chassis |
| C1254 | EPS ECU internal fault (related to APA) | 17 | Chassis |
| C1256 | Falla interna | 24 | Chassis |
| C1261 | LF hold valve solenoid | 27 | Chassis |
| C1265 | LR hold valve solenoid | 15 | Chassis |
| C1266 | LR outlet valve solenoid | 26 | Chassis |
| C1273 | Right driven TCS isolation solenoid fault (ABS 5.3 only) | 23 | Chassis |
| C1274 | Right driven TCS solenoid fault (DBC7 only) | 24 | Chassis |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.