Saab fault codes
17,337 codes · 3 vehicle records · 22 ECU records · 0 live-data parameters
Codes 17,337
| Code | Description | Brands | System |
|---|---|---|---|
| U2107 | Exit DTC -00 | 12 | Network |
| U2108 | For all other hydraulic electronic control unit part numbers, see 68 | 11 | Network |
| U2109 | Back-up battery | 10 | Network |
| U2111 | CAN voltage too high | 12 | Network |
| U2112 | CAN voltage too low | 15 | Network |
| U2113 | CAN-Bus No Communication with SDM | 11 | Network |
| U2114 | Lost Communication with Passenger Presence Module or Child Seat Position Sensor | 7 | Network |
| U2115 | Lost Communication with Inflatable Restraint Sensing and Diagnostic Module | 8 | Network |
| U2116 | Replace Electronic Control Unit | 10 | Network |
| U2117 | Invalid Data from DIS | 11 | Network |
| U2118 | Remote wake-up fault | 11 | Network |
| U2119 | Electronic parking brake automatic release function wake-up status message reception problem | 9 | Network |
| U2120 | CAN-Bus No Communication with AHL | 7 | Network |
| U2121 | Vehicle Identification Number Not Programmed | 6 | Network |
| U2122 | CAN-Bus No Communication With Radio | 7 | Network |
| U2124 | CAN-Bus No Communication With AHP | 6 | Network |
| U2125 | BR206 C43_ROW | 9 | Network |
| U2127 | CAN-Bus No Communication With Electronic Climate Control | 10 | Network |
| U2128 | Lost Communication with Rear HVAC Control Module | 7 | Network |
| U2129 | Lost Communication with Remote Function Actuation Control Module | 8 | Network |
| U2130 | CAN-Bus No Communication with DDM | 8 | Network |
| U2131 | CAN-Bus No Communication with DSM | 6 | Network |
| U2132 | Cam Shaft Sensor Signal Error - No Signal | 7 | Network |
| U2133 | Lost Communication with Passenger Seat Module | 7 | Network |
| U2134 | Lost Communication with Rear Door Control Module | 6 | Network |
| U2135 | Lost Communication with Body Control Module | 9 | Network |
| U2136 | No Exterior Mirror Communication | 6 | Network |
| U2137 | Lost Communication with Immobilizer | 8 | Network |
| U2138 | Lost Communication with Steering Column Lock Control Module | 7 | Network |
| U2139 | Immobiliser No Or Wrong Signal | 9 | Network |
| U2140 | Lost Communication with Underhood Electrical Center | 12 | Network |
| U2141 | Lost Communication with Rear Electrical Center | 9 | Network |
| U2142 | CAN-Bus No Communication with YRS | 7 | Network |
| U2143 | CAN-Bus No Communication with SAS | 9 | Network |
| U2144 | Knock Sensor Circuit Malfunction | 11 | Network |
| U2145 | CAN-Bus No Communication with PAS | 8 | Network |
| U2146 | CAN-Bus No Communication With SLM | 6 | Network |
| U2147 | Lost Communication with Auxiliary Heater System | 8 | Network |
| U2148 | Lost Communication with Sunroof Module | 8 | Network |
| U2149 | CAN-Bus No Communication with TPMS | 8 | Network |
| U2150 | Navigation Electronic Control Unit Gateway Communication | 11 | Network |
| U2151 | Navigation Electronic Control Unit Communication | 7 | Network |
| U2161 | Lost Communication with Body Control Module | 6 | Network |
| U2163 | Lost Communication with Left Rear Door Switch Panel Control Module | 9 | Network |
| U2164 | Lost Communication with Right Rear Door Switch Panel Control Module | 10 | Network |
| U2165 | Lost Communication with Driver Door Switch Panel Control Module | 9 | Network |
| U2167 | Lost Communication with Remote Control Door Lock Receiver | 6 | Network |
| U2168 | Lost Communication with Left Side-Object Sensor Module | 6 | Network |
| U2169 | Lost Communication with Right Side-Object Sensor Module | 7 | Network |
| U216A | Lost Communication with Front Object Detection Control Module | 6 | Network |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.