Mitsubishi fault codes
8,900 codes · 153 vehicle records · 40 ECU records · 0 live-data parameters
Codes 8,900
| Code | Description | Brands | System |
|---|---|---|---|
| B2469 | Line Out Circuit Low Voltage | 9 | Body |
| B2470 | daytime running lamps fault | 11 | Body |
| B2471 | interior lamp fault | 10 | Body |
| B2472 | low beam fault | 10 | Body |
| B2473 | high beam fault | 8 | Body |
| B2474 | navigation display head (NDH) back lighting malfunction | 9 | Body |
| B2475 | navigation display head (NDH) auxiliary input malfunction | 9 | Body |
| B2476 | Cellular phone select service switch malfunction | 9 | Body |
| B2477 | If the DTC is still present | 13 | Body |
| B2478 | reverse lamp shorted to battery | 9 | Body |
| B2480 | Impact detection sensor circuit low | 7 | Body |
| B2481 | Impact detection sensor circuit high | 7 | Body |
| B2482 | cellular phone select service switch range/performance | 8 | Body |
| B2483 | GPS signal circuit low | 7 | Body |
| B2484 | GPS signal circuit open | 9 | Body |
| B2485 | Bluetooth Antenna Circuit | 11 | Body |
| B2486 | Left Rear Seat Back Heater Sensor Circuit | 10 | Body |
| B2487 | Right Rear Seat Back Heater Sensor Circuit | 10 | Body |
| B2488 | ECU internal error | 4 | Body |
| B2489 | PSD current sensing circuit | 4 | Body |
| B248A | Wireless LAN Antenna | 7 | Body |
| B248B | No description available | 1 | Body |
| B2490 | Left Rear Seat Cushion Heater Circuit | 10 | Body |
| B2491 | Right Rear Seat Cushion Heater Circuit | 11 | Body |
| B2492 | M166*1B, Y114, Y114*1B | 10 | Body |
| B2493 | Right Rear Seat Back Heater Circuit | 10 | Body |
| B2494 | Engine Torque not plausible | 10 | Body |
| B2495 | Replace Electronic Control Unit | 10 | Body |
| B2496 | Initial switch not detect | 4 | Body |
| B2497 | Replace Electronic Control Unit | 8 | Body |
| B2498 | 39 = Warning light circuit failure | 10 | Body |
| B2499 | Automatic All Door Lock Switch Circuit | 9 | Body |
| B24A0 | If the drive motor circuit is open, PSD ECU sets DTC | 10 | Body |
| B24A1 | If the drive motor circuit is short to battery, PSD ECU sets DTC | 9 | Body |
| B24A2 | If the drive motor circuit is short to ground, PSD ECU sets DTC | 11 | Body |
| B24A3 | If the drive clutch circuit is open or short to battery, PSD ECU sets DTC | 10 | Body |
| B24A4 | If the drive clutch circuit is short to ground, PSD ECU sets DTC | 11 | Body |
| B24A5 | If the drive motor circuit is open, PSD ECU sets DTC | 9 | Body |
| B24A6 | If the drive motor circuit is short to battery, PSD ECU sets DTC | 11 | Body |
| B24A7 | If the drive motor circuit is short to ground, PSD ECU sets DTC | 10 | Body |
| B24A8 | If the drive clutch circuit is open or short to battery, PSD ECU sets DTC | 10 | Body |
| B24A9 | Windshield wiper switch HIGH position circuit fault | 4 | Body |
| B24AB | If the sliding door latch circuit is short to ground, PSD ECU sets DTC | 8 | Body |
| B24AC | If the sliding door latch power circuit is open, PSD ECU sets DTC | 9 | Body |
| B24AE | Rear fog light switch ON position fault | 8 | Body |
| B24AF | No description available | 1 | Body |
| B24B0 | After the replacement of power tailgate module, it should be changed to the field mode and if not, DTC appears in the system | 3 | Body |
| B24B2 | M_ S0#Datensatz 1 | 2 | Body |
| B24B4 | M_ S0#Schicht-Abgasanlage | 9 | Body |
| B24B5 | Rear Climate Control Selection Switch Assembly Circuit | 7 | Body |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.