KIA fault codes
Coverage shown is Hyundai data: 7,974 codes · 345 vehicle records · 168 ECU records · 0 live-data parameters.
KIA shares fault-code data with Hyundai. Data may not cover KIA-specific systems.
Codes 7,974
| Code | Description | Brands | System |
|---|---|---|---|
| B281000 | If SVMS CAN message is not received, IGPM sets DTC | 1 | Body |
| B2811 | Right infrared filter fixed on the IR side | 9 | Body |
| B281100 | The AVN Head Module sets DTC when CAN message of version information has not been received from right rear Monitor via Local-CAN | 1 | Body |
| B2819 | No description available | 3 | Body |
| B2820 | Rear window wiper relay or head lamp wiper. short to B+ | 11 | Body |
| B2821 | Vehicle body signal | 13 | Body |
| B2822 | Lost communication with ST signal | 7 | Body |
| B2823 | Trip odometer reset switch circuit low | 8 | Body |
| B2824 | Pump motor TEMP.SNSR: SHT to GND | 5 | Body |
| B282400 | The AVN Head Module sets DTC when the voltage level of MIC signal line is lower than normal condition | 1 | Body |
| B2825 | No description available | 3 | Body |
| B2826 | Info Display Fuel Information Switch Circuit | 11 | Body |
| B2827 | No description available | 4 | Body |
| B282700 | The AVN Head Module sets DTC when the voltage level of GPS signal line is lower than normal condition | 1 | Body |
| B2828 | DIC fuel switch circuit low | 4 | Body |
| B2829 | No description available | 2 | Body |
| B2830 | No description available | 5 | Body |
| B2831 | Info Display Gauge Switch Circuit | 12 | Body |
| B2832 | ECU internal | 5 | Body |
| B2835 | ECU internal | 6 | Body |
| B2836 | Info Display Reset Switch Circuit | 12 | Body |
| B2837 | ECU internal | 4 | Body |
| B2838 | DIC reset switch circuit low | 4 | Body |
| B2839 | No description available | 2 | Body |
| B2840 | Left Headlamp Swiveling Control-Commanded Position Not Reachable | 6 | Body |
| B284000 | The AVN Head Module sets DTC when the control signal has not been received from bluetooth module via I2C | 1 | Body |
| B2841 | Info Display English or Metric Units Switch Circuit | 13 | Body |
| B2842 | Hall sensor power: SHT to GND | 5 | Body |
| B2843 | DIC english/metric switch circuit low | 5 | Body |
| B2844 | No description available | 3 | Body |
| B2845 | No description available | 1 | Body |
| B2846 | Info Display Trip or Season Odometer Switch Circuit | 8 | Body |
| B2847 | No description available | 1 | Body |
| B2848 | Passlock power output short to battery | 5 | Body |
| B2849 | No description available | 3 | Body |
| B2850 | Telescope Forward Switch Circuit | 9 | Body |
| B2851 | No description available | 3 | Body |
| B2852 | No description available | 3 | Body |
| B285300 | is outputted when image calibration has not been performed after assembling/replacing HUD module | 1 | Body |
| B2854 | Implausible Data Received from AHBM | 4 | Body |
| B285400 | The I-BOX Module sets DTC when there are a communication error with Modem | 1 | Body |
| B2855 | Telescope Rearward Switch Circuit | 7 | Body |
| B285500 | The AVN Head Module sets DTC when M-CAN message has not been received from Cluster via M-CAN | 1 | Body |
| B2856 | No description available | 1 | Body |
| B2857 | No description available | 1 | Body |
| B2858 | telescope rearward switch circuit malfunction | 6 | Body |
| B2859 | No description available | 1 | Body |
| B2860 | telescope position sensor range | 11 | Body |
| B291500 | is set when there is open in 'DRIVER DOOR SPEAKER' circuit | 1 | Body |
| B2916 | No description available | 3 | Body |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.