Mercedes-Benz fault codes
20,291 codes · 1,724 vehicle records · 258 ECU records · 56,350 live-data parameters
Search only Mercedes-Benz codes
Codes 20,291
| Code | Description | Brands | System |
|---|---|---|---|
| C194700 | Steuergerät Ventile elektrischer Fehler: passiver Test | 1 | Chassis |
| C195100 | Raddrucksensorsignal hinten links: P1 im Fehlerband | 1 | Chassis |
| C195200 | Hydraulische Leakage in Hinterrachse erkannt | 1 | Chassis |
| C195300 | Raddrucksensorsignal Plausibilitätstfehler Hinterachse links | 1 | Chassis |
| C196600 | Steuergerät PCU: Pumpenfehler bei Testpuls erkannt | 1 | Chassis |
| C196700 | Versorgung Pumpe | 1 | Chassis |
| C196800 | Kurzschlu Pumpe | 1 | Chassis |
| C196900 | Plausibilität Booster | 1 | Chassis |
| C197E | No description available | 1 | Chassis |
| C198000 | PML keine elektrische Verbindung | 1 | Chassis |
| C199400 | berlast erkannt während sehr kurzer Unterspannungen (die nicht im Rahmen der Unterspannungserkennung erkannt werden) | 1 | Chassis |
| C199600 | Monitoring CAN aus | 1 | Chassis |
| C1A0000 | No description available | 2 | Chassis |
| C1A0100 | No description available | 2 | Chassis |
| C1A0200 | No description available | 2 | Chassis |
| C1A0300 | No description available | 2 | Chassis |
| C1A607B | No description available | 2 | Chassis |
| C1A727A | No description available | 2 | Chassis |
| C1A737A | No description available | 2 | Chassis |
| C1A747A | No description available | 2 | Chassis |
| C1A9092 | performance or incorrect operation - TPW Error | 1 | Chassis |
| C1A9186 | signal invalid - TPW Invalid Input Data | 1 | Chassis |
| C1A9392 | performance or incorrect operation - TPW Auto Calibration Failed | 1 | Chassis |
| C1B0004 | No description available | 2 | Chassis |
| C1B0041 | No description available | 2 | Chassis |
| C1B0044 | No description available | 2 | Chassis |
| C1B0045 | No description available | 2 | Chassis |
| C1B104B | over temperature - ECU Temperature - over temperature | 1 | Chassis |
| C1B1198 | component or system over temperature - Sensor Temperature - component or system over temperature | 1 | Chassis |
| C1C1104 | Coding error | 1 | Chassis |
| C1C2E | CddSENT_State_ rror | 2 | Chassis |
| C1E0044 | No description available | 2 | Chassis |
| C1E0045 | No description available | 2 | Chassis |
| C1E0046 | No description available | 2 | Chassis |
| C1E0047 | No description available | 2 | Chassis |
| C200100 | Versorgung Steuergerät: Unterspannung | 2 | Chassis |
| C200300 | gas test is active | 1 | Chassis |
| C200400 | Master RAM Zelle defekt, Master MarchSS RAM Startup Check fehlgeschlagen | 2 | Chassis |
| C200500 | Misusage of GasTest modus is detected | 1 | Chassis |
| C200E00 | Slave- Exception Prfung fehlgeschlagen | 1 | Chassis |
| C201000 | Master Controller geht in Errorzustand aufgrund einer Zeitberschreitung | 1 | Chassis |
| C201100 | CRC Kommunikationsstrung Master/Slave (Master - Content) | 2 | Chassis |
| C201200 | 10ms Zeitscheiben Verletzung Master/Slave (Master - Content) | 2 | Chassis |
| C201300 | Illegal System Bus Address Error Flag | 2 | Chassis |
| C201400 | FlexRay RAM check error | 2 | Chassis |
| C201500 | SensorInformation data not received completely | 1 | Chassis |
| C201600 | Serial Nbr. rcvd. via CAN does not match Serial-No. in EEPROM, assuming a changes sensor cluster is detected | 1 | Chassis |
| C201800 | Ax signal has an INIT status failure | 1 | Chassis |
| C201900 | Ax signal value contains Invalid Value pattern | 1 | Chassis |
| C201A00 | Ax signal is faulty (permanent) | 1 | Chassis |
Some brand data is extracted from diagnostic files and may contain manufacturer-specific wording. General SAE J2012 descriptions are used where available.